{"product_id":"178b2134","title":"178B2134","description":"\u003cp\u003eThe \u003cstrong\u003e178B2134\u003c\/strong\u003e decentralized inverter is manufactured by Danfoss as part of the FCD 300 Micro Drives series. By integrating power electronics, control logic, and I\/O in a sealed enclosure, this device mounts close to, or directly on, the driven equipment. Within automated production or material-handling cells it converts fixed mains power into a variable frequency and voltage, allowing small AC motors to follow speed references supplied by PLCs or simple analog signals while minimizing panel wiring.\u003c\/p\u003e\u003cp\u003eElectrically the drive accepts a three-phase supply of \u003cstrong\u003e3x380-480V\u003c\/strong\u003e and delivers a continuous motor power of \u003cstrong\u003e0.37 kW\u003c\/strong\u003e, equivalent to \u003cstrong\u003e.50 HP\u003c\/strong\u003e at the shaft. The hardware is supplied in the \u003cstrong\u003eExtended (24V ext.)\u003c\/strong\u003e variant so the control section can remain powered by an external 24 VDC source during mains interruptions. The enclosure carries an \u003cstrong\u003eIP66\u003c\/strong\u003e rating, meaning dust-tight construction and protection against high-pressure water jets. Internal logic scales acceleration and deceleration to protect connected motors from thermal overload and excessive torque.\u003c\/p\u003e\u003cp\u003eThe unit is configured for \u003cstrong\u003eProcessing Application\u003c\/strong\u003e duties, so its default parameter set favors constant-torque loads found in mixers and material conveyance. A \u003cstrong\u003eNo display\u003c\/strong\u003e front panel keeps the housing smooth, relying on remote software tools for commissioning, and the wiring area is simplified because there is no terminal box; field cables enter through pre-sealed glands. Electromagnetic compliance on distributed installations is handled by the built-in \u003cstrong\u003eWith integral 1A filter\u003c\/strong\u003e. Communication is limited to hard-wired control signals because it is supplied \u003cstrong\u003eWithout fieldbus\u003c\/strong\u003e support, and the exterior receives a standard epoxy coating that withstands typical plant atmospheres.\u003c\/p\u003e","brand":"Danfoss","offers":[{"title":"Unstocked","offer_id":51897453216045,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/178b2134__361d0580-07e4-4a8a-b978-913381a09fa8.webp?v=1771316109","url":"https:\/\/servosupplier.com\/products\/178b2134","provider":"Servo Supplier","version":"1.0","type":"link"}