{"product_id":"8bcm00041034c-0","title":"8BCM0004.1034C-0","description":"\u003cp\u003eThe \u003cstrong\u003e8BCM0004.1034C-0\u003c\/strong\u003e is a motor supply and feedback cable manufactured by B\u0026amp;R Automation for use with CM16 servo motor systems. It connects a CM16 servo motor to a matching drive and carries three-phase power, encoder signals, and protective ground within one shielded cable. This arrangement reduces the number of separate cable runs in automated equipment and supports reliable routing in pick-and-place units, conveyor axes, and other motion systems used in dusty or washdown-prone areas.\u003c\/p\u003e\u003cp\u003eThe cable is supplied in a length of \u003cstrong\u003e4 m\u003c\/strong\u003e, which suits short machine spans and compact layouts. An \u003cstrong\u003e8-pin female Series 915 connector\u003c\/strong\u003e is molded onto the drive end, providing a keyed connection with a sealed coupling interface. When connected, the assembly reaches \u003cstrong\u003eIP66\/67\u003c\/strong\u003e protection, helping it resist heavy washdown spray and temporary immersion during normal industrial use. The cable has an outer diameter of \u003cstrong\u003e10.1 mm\u003c\/strong\u003e with a tolerance of ±0.3 mm, which helps it fit into tight routing spaces and cable carriers. Its outer jacket is made of \u003cstrong\u003ePUR\u003c\/strong\u003e, a material that resists oils, cutting fluids, abrasion, and repeated flexing better than standard PVC jackets.\u003c\/p\u003e\u003cp\u003eThe cable can handle acceleration up to \u003cstrong\u003e50 m\/s²\u003c\/strong\u003e and travel speeds up to \u003cstrong\u003e300 m\/min\u003c\/strong\u003e, making it suitable for fast-moving linear axes and repetitive motion paths. A minimum moving bend radius of \u003cstrong\u003e78 mm\u003c\/strong\u003e supports installation in compact cable carriers, while the static bend radius of 32 mm allows tighter loops where the cable remains fixed. Electrical insulation is supported by a minimum insulation resistance of \u003cstrong\u003e500 MΩ·km\u003c\/strong\u003e, along with a 4 kV wire-to-wire test voltage and a conductor layout of 4×0.75 mm² plus two shielded signal pairs. The assembly also supports 500 mating cycles and has a mass of 0.36 kg, which helps keep moving cable loads low on dynamic servo axes.\u003c\/p\u003e","brand":"B \u0026 R Automation","offers":[{"title":"Unused Surplus","offer_id":52082348556589,"sku":null,"price":1248.01,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/8bcm00041034c-0__90184b4f-5947-4d49-a6c2-efd7ebc01ab6.webp?v=1778051874","url":"https:\/\/servosupplier.com\/products\/8bcm00041034c-0","provider":"Servo Supplier","version":"1.0","type":"link"}