{"product_id":"mdd021a-n-100-n2g-032fa0","title":"MDD021A-N-100-N2G-032FA0","description":"\u003cp\u003eThe \u003cstrong\u003eMDD021A-N-100-N2G-032FA0\u003c\/strong\u003e is a compact synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers, it supports precision motion tasks in small automation axes. Its standard housing and standard rotor balancing help keep vibration low while maintaining a minimal footprint. This makes the unit suitable for pick-and-place heads, label applicators, or miniature spindles where space is limited and rapid acceleration is needed.\u003c\/p\u003e\u003cp\u003eAt its rated electrical frequency, the motor reaches a \u003cstrong\u003e10,000 rpm\u003c\/strong\u003e nominal speed, allowing short cycle times for indexing or spindle duties. Continuous torque at standstill is \u003cstrong\u003e0.15 Nm\u003c\/strong\u003e, which is the maximum static load the motor can hold thermally without exceeding its temperature limit. A centering shoulder of \u003cstrong\u003e32 mm\u003c\/strong\u003e simplifies coaxial alignment with gearboxes or mounting flanges. Power and feedback lines connect through a \u003cstrong\u003econnector\u003c\/strong\u003e interface, which keeps installation straightforward. Rotor position is measured with \u003cstrong\u003eresolver feedback\u003c\/strong\u003e, providing analog sine-cosine signals that remain accurate over a wide temperature span and during high rotational speeds. This feedback method also supports stable commutation and speed control with a compatible digital drive.\u003c\/p\u003e\u003cp\u003eAll electrical connectors are oriented on \u003cstrong\u003eSide A\u003c\/strong\u003e, so cables can be routed from one face of the machine frame and kept away from adjacent moving parts. The frame code \u003cstrong\u003e021\u003c\/strong\u003e keeps overall motor diameter and inertia low, which benefits lightweight axes that need fast acceleration. A \u003cstrong\u003eplain shaft\u003c\/strong\u003e transmits torque directly to couplings while minimizing runout that keyed interfaces can introduce. The motor is supplied \u003cstrong\u003ewithout a blocking brake\u003c\/strong\u003e, so static holding must be provided by drive torque or an external clamp. The shaft end is present only on the drive side, and the body remains short in length designation A. Because there is no shaft seal, the motor should be installed inside a protected enclosure.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unstocked","offer_id":52038672187693,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd021a-n-100-n2g-032fa0__5edae169-602f-4f3a-a507-c43d0583be86.webp?v=1777966571","url":"https:\/\/servosupplier.com\/products\/mdd021a-n-100-n2g-032fa0","provider":"Servo Supplier","version":"1.0","type":"link"}