{"product_id":"mdd025a-n-100-n2k-040pb1","title":"MDD025A-N-100-N2K-040PB1","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025A-N-100-N2K-040PB1\u003c\/strong\u003e is a brushless synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the \u003cstrong\u003eMDD Synchronous Motors\u003c\/strong\u003e series. Designed for use with digital drive controllers, it converts commanded current into precise rotational motion for pick-and-place heads, miniature spindles, and indexing tables in automated lines. Its 025 frame, A-length housing, and integrated absolute encoder provide a compact source of position data and torque, so controlled axes can resume operation without a homing cycle after a power interruption or controlled shutdown.\u003c\/p\u003e\u003cp\u003eThe mechanical interface begins with a centering pilot of \u003cstrong\u003e40 mm\u003c\/strong\u003e, keeping the stator coaxial with the mounting flange during installation. Standard dynamic balancing limits residual vibration when the rotor reaches the rated speed of \u003cstrong\u003e10,000 rpm\u003c\/strong\u003e. At standstill, the motor can supply a continuous torque of \u003cstrong\u003e0.33 Nm\u003c\/strong\u003e, supporting light-load positioning without overheating. Power, brake, and sensor leads exit to the rear because the terminations are on \u003cstrong\u003eside B\u003c\/strong\u003e, and a keyed \u003cstrong\u003econnector\u003c\/strong\u003e permits quick disconnection and reconnection during service. A standard housing encloses the windings, and a shaft seal is fitted to protect the front bearing from coolant splash or lubricant migration.\u003c\/p\u003e\u003cp\u003eA blocking brake mounted at the rear generates \u003cstrong\u003e1.0 Nm\u003c\/strong\u003e of static holding torque, allowing vertical axes to remain secure when the drive is de-energized. Rotor angle during motion is measured through \u003cstrong\u003eresolver feedback\u003c\/strong\u003e, while the integrated encoder retains absolute multi-turn information for startup alignment after power returns. The output shaft has a \u003cstrong\u003ekeyway\u003c\/strong\u003e and is shipped without a secondary shaft end, which simplifies coupling to timing pulleys or miniature gear reducers. This single-ended shaft layout also leaves the rear of the motor available for the brake and feedback components.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unstocked","offer_id":52038678348077,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025a-n-100-n2k-040pb1__b974365b-9d87-47e0-b804-33b9fe889319.webp?v=1777966774","url":"https:\/\/servosupplier.com\/products\/mdd025a-n-100-n2k-040pb1","provider":"Servo Supplier","version":"1.0","type":"link"}