{"product_id":"mdd025b-n-100-n2g-040ff0","title":"MDD025B-N-100-N2G-040FF0","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025B-N-100-N2G-040FF0\u003c\/strong\u003e synchronous servo motor is produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts modulated current into rotational motion for compact axes in industrial automation, including pick-and-place heads and miniature gantry stages. The device uses the 025 frame in a standard housing, and its balancing is set to a standard grade to keep residual vibration low at elevated speed. This layout is well suited to small servo axes where low moving mass, quick response, and limited installation space are important.\u003c\/p\u003e\u003cp\u003eThe motor develops a continuous standstill torque of \u003cstrong\u003e0.60 Nm\u003c\/strong\u003e, which is suitable for holding light loads without external gearing. A nominal speed of \u003cstrong\u003e10,000 rpm\u003c\/strong\u003e pairs that torque with rapid indexing and high surface velocity. Precise mounting is supported by a \u003cstrong\u003e40 mm\u003c\/strong\u003e centering diameter, and wiring exits on the \u003cstrong\u003eright side\u003c\/strong\u003e of the stator. Power and feedback are routed through a \u003cstrong\u003econnecting cable with a coupling unit\u003c\/strong\u003e, which helps keep cable routing compact on modular machines. Position data is returned through \u003cstrong\u003eresolver feedback\u003c\/strong\u003e, giving the drive an analog angle signal that remains stable at elevated temperatures. The motor uses length code B for the active stack, which suits dynamic micro-axis duty cycles.\u003c\/p\u003e\u003cp\u003eIt is delivered \u003cstrong\u003ewithout a blocking brake\u003c\/strong\u003e, so any static holding duty must be supplied by the drive or by an external brake module. The rotor uses a \u003cstrong\u003eplain shaft\u003c\/strong\u003e with no keyway, and the side-B extension is omitted for this shaft-end arrangement. Because the shaft has no keyway, torque is typically transferred through a clamping hub or a similar friction-based coupling. To minimize friction, the motor is also supplied \u003cstrong\u003ewithout a shaft seal\u003c\/strong\u003e. If liquids are present, a separate enclosure seal is required. In dry, enclosed equipment, this arrangement reduces drag at the shaft and avoids contact from an added lip seal.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Refurbished","offer_id":52056665653549,"sku":null,"price":4312.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025b-n-100-n2g-040ff0__a02ead50-8499-4ff1-9428-0d402dc4fda6.webp?v=1778570824","url":"https:\/\/servosupplier.com\/products\/mdd025b-n-100-n2g-040ff0","provider":"Servo Supplier","version":"1.0","type":"link"}