{"product_id":"mdd025b-n-100-n2g-040md1","title":"MDD025B-N-100-N2G-040MD1","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025B-N-100-N2G-040MD1\u003c\/strong\u003e is a compact AC synchronous motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for direct coupling to digital drive controllers that govern torque and position in automated assembly lines. The motor converts controller commands into precise rotary motion for pick-and-place heads, light gantries, and indexing tables. Its compact frame size also suits machine sections where mounting space is limited. Because it is a synchronous design, it works in closed-loop servo systems that need predictable response during acceleration, dwell, and rapid indexing moves.\u003c\/p\u003e\u003cp\u003eThe flange registers with a \u003cstrong\u003e40 mm\u003c\/strong\u003e centering diameter, providing coaxial alignment during installation. Power and feedback conductors exit on \u003cstrong\u003eside B\u003c\/strong\u003e, and the motor uses a \u003cstrong\u003econnecting cable with a coupling unit\u003c\/strong\u003e for a compact electrical interface. At standstill, the rotor can deliver \u003cstrong\u003e0.60 Nm\u003c\/strong\u003e of continuous torque without exceeding rated heating, and the electromagnetic design supports speeds up to \u003cstrong\u003e10,000 rpm\u003c\/strong\u003e for high-speed indexing. The motor uses standard balancing, and its housing fits common MDD mounting arrangements without extra adapters. Routing both power and feedback through the same exit side can simplify cable management in compact machine sections.\u003c\/p\u003e\u003cp\u003eA blocking brake is integrated and provides \u003cstrong\u003e1.0 Nm\u003c\/strong\u003e of static holding torque when power is removed. Position feedback relies on \u003cstrong\u003eresolver feedback\u003c\/strong\u003e, enabling analog angle detection in servo loops that must tolerate electrical noise. The \u003cstrong\u003e025\u003c\/strong\u003e frame helps keep inertia low, and the motor is supplied without a shaft seal. Its output uses a single-ended \u003cstrong\u003ekeyway\u003c\/strong\u003e shaft, which mates with standard couplings and leaves no shaft extension on the opposite side. The lack of a shaft seal makes the shaft end better suited to clean machine areas than to washdown zones.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Refurbished","offer_id":52059245347117,"sku":null,"price":4087.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025b-n-100-n2g-040md1__bff2dd4d-96ea-43c0-8621-682ab457e505.webp?v=1777966851","url":"https:\/\/servosupplier.com\/products\/mdd025b-n-100-n2g-040md1","provider":"Servo Supplier","version":"1.0","type":"link"}