{"product_id":"mdd025b-n-100-n2k-040fc0","title":"MDD025B-N-100-N2K-040FC0","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025B-N-100-N2K-040FC0\u003c\/strong\u003e is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed as a compact actuator for digital drive controllers, it provides high-speed rotary motion for indexing tooling, traversing light conveyors, and rotating sensor stages in automated equipment. Its small 025 frame and standard housing make it suitable for tightly packed multi-axis assemblies where available space is limited. That layout is useful where several motors must fit around indexing tables or compact transfer systems.\u003c\/p\u003e\u003cp\u003eThe motor reaches a nominal speed of \u003cstrong\u003e10000 rpm\u003c\/strong\u003e, which supports rapid cycle times when it is paired with a matching inverter. At standstill, it can deliver \u003cstrong\u003e0.60 Nm\u003c\/strong\u003e of continuous torque, allowing the controller to hold fixtures or other lightweight loads without excessive heating. A \u003cstrong\u003e40 mm\u003c\/strong\u003e centering diameter helps align the motor with adjacent machinery and supports repeatable installation. Power and feedback conductors exit on \u003cstrong\u003eside A\u003c\/strong\u003e, keeping cable routing on the same face as the drive shaft in common horizontal mounting arrangements. The plain shaft can connect directly to couplings or pulleys sized for this motor frame.\u003c\/p\u003e\u003cp\u003ePosition data comes from an \u003cstrong\u003eintegrated absolute encoder\u003c\/strong\u003e with multi-turn capability, and the drive also receives angle information through \u003cstrong\u003eresolver feedback\u003c\/strong\u003e for compatibility with older control cards. A \u003cstrong\u003econnecting cable with a coupling unit\u003c\/strong\u003e allows the motor to be disconnected without disturbing cabinet bushings. The motor is supplied \u003cstrong\u003ewithout a blocking brake\u003c\/strong\u003e, so vertical axes need an external holding device when power is removed. It is also built \u003cstrong\u003ewithout a shaft seal\u003c\/strong\u003e, which limits it to clean, dry environments where low friction is preferred over splash protection. A single shaft end on the drive side helps keep rotating inertia low during acceleration and deceleration.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Refurbished","offer_id":52059423670573,"sku":null,"price":4087.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025b-n-100-n2k-040fc0__96d42710-abdd-4017-bec6-f8bd47248bf5.webp?v=1778570880","url":"https:\/\/servosupplier.com\/products\/mdd025b-n-100-n2k-040fc0","provider":"Servo Supplier","version":"1.0","type":"link"}