{"product_id":"mdd025b-n-100-n2k-040me0","title":"MDD025B-N-100-N2K-040ME0","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025B-N-100-N2K-040ME0\u003c\/strong\u003e is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts regulated current into precise rotary motion for assembly robots, compact conveyors, and light machining spindles. Its integrated feedback device streams position data directly to the controller, so speed and torque can be regulated in a closed loop even at high cycle rates. The small frame allows the unit to be installed close to the load, which can reduce coupling backlash and improve system stiffness.\u003c\/p\u003e\u003cp\u003eIts continuous torque at standstill is \u003cstrong\u003e0.60 Nm\u003c\/strong\u003e, so it can hold a steady load at zero speed within its thermal limits. During operation, the shaft reaches a nominal speed of \u003cstrong\u003e10,000 rpm\u003c\/strong\u003e, which suits rapid indexing and high-speed positioning tasks. Accurate mechanical alignment is supported by a \u003cstrong\u003e40 mm\u003c\/strong\u003e centering diameter that seats the flange concentrically on the machine plate. Power and feedback conductors exit on the \u003cstrong\u003eleft side\u003c\/strong\u003e, which can simplify routing when several axes are mounted next to each other. Electrical termination uses a \u003cstrong\u003econnecting cable with a coupling unit\u003c\/strong\u003e, allowing the motor to be disconnected without opening gland fittings. Commutation and velocity data are supplied through \u003cstrong\u003eresolver feedback\u003c\/strong\u003e, which provides analog sine-cosine signals with good resistance to electrical noise.\u003c\/p\u003e\u003cp\u003eStandard dynamic balancing helps keep vibration low across the speed range, and the housing uses the series' standard aluminum profile for efficient heat transfer. Because the motor is supplied \u003cstrong\u003ewithout a shaft seal\u003c\/strong\u003e, it should be installed away from pressurized coolant or abrasive dust. The single output shaft has a \u003cstrong\u003ekeyway\u003c\/strong\u003e for positive torque transmission to gears or pulleys. A frame size of \u003cstrong\u003e025\u003c\/strong\u003e keeps mass and inertia low, and static position holding must be provided by the drive because no holding brake is included.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Refurbished","offer_id":52059243938093,"sku":null,"price":4087.74,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025b-n-100-n2k-040me0__0459798a-6e0f-476e-aa43-aefa8d4f934f.webp?v=1777966917","url":"https:\/\/servosupplier.com\/products\/mdd025b-n-100-n2k-040me0","provider":"Servo Supplier","version":"1.0","type":"link"}