{"product_id":"mdd025b-n-100-n2k-040pe1","title":"MDD025B-N-100-N2K-040PE1","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025B-N-100-N2K-040PE1\u003c\/strong\u003e is a synchronous servo motor engineered by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is supplied as a compact rotary actuator intended for direct coupling to digital drive controllers in automated machinery. Within an axis group, it supplies commanded torque and velocity while its internal feedback system maintains position information, allowing closed-loop motion without additional measuring devices.\u003c\/p\u003e\u003cp\u003eAt standstill, the motor delivers a continuous torque of \u003cstrong\u003e0.60 Nm\u003c\/strong\u003e, which sets the thermal limit for holding loads during static positioning. During service, it can reach a nominal rotational speed of \u003cstrong\u003e10000 rpm\u003c\/strong\u003e, enabling high-cycle pick-and-place or spindle duties where short move times are critical. The centering diameter measures \u003cstrong\u003e40 mm\u003c\/strong\u003e, providing a reference surface that aligns the stator to the machine frame and minimizes radial runout. Electrical and feedback terminations are routed on the \u003cstrong\u003eleft side\u003c\/strong\u003e of the housing so cable routing can remain consistent along that orientation. A factory-installed \u003cstrong\u003eshaft seal\u003c\/strong\u003e surrounds the output journal, reducing lubricant escape and helping block fine particles from reaching the bearing set.\u003c\/p\u003e\u003cp\u003eDynamic stopping and load securing are handled by an integrated blocking brake that produces \u003cstrong\u003e1.0 Nm\u003c\/strong\u003e of holding torque when the drive is disabled. For commutation and speed control, the motor uses \u003cstrong\u003eresolver feedback\u003c\/strong\u003e, which provides rotor angle information with good resistance to electrical noise. Power is introduced through a \u003cstrong\u003econnecting cable with coupling unit\u003c\/strong\u003e, so the motor can be disconnected without opening the enclosure. The output shaft follows a \u003cstrong\u003ekeyway\u003c\/strong\u003e configuration so torque can be transmitted through a keyed hub, while the opposite side remains closed because the model does not use a secondary shaft end.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unstocked","offer_id":52038685163821,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025b-n-100-n2k-040pe1__ff8d7733-54ea-42b5-a0d9-91285d6111eb.webp?v=1777966949","url":"https:\/\/servosupplier.com\/products\/mdd025b-n-100-n2k-040pe1","provider":"Servo Supplier","version":"1.0","type":"link"}