{"product_id":"mdd025c-n-100-n2g-040fb1","title":"MDD025C-N-100-N2G-040FB1","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025C-N-100-N2G-040FB1\u003c\/strong\u003e is a synchronous motor built by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. It is intended for integration with digital drive controllers, where it translates commanded current into tightly regulated rotary motion for light-duty positioning and high-speed auxiliary axes in industrial automation cells. A standard housing encloses the stator for general industrial use. Its synchronous design supports stable speed regulation and repeatable motion during short, fast indexing tasks.\u003c\/p\u003e\u003cp\u003eThis model sustains a continuous standstill torque of \u003cstrong\u003e0.90 Nm\u003c\/strong\u003e, allowing it to hold or slowly move loads without overheating while stationary. During normal operation, the rotor can reach a nominal speed of \u003cstrong\u003e10000 rpm\u003c\/strong\u003e, supporting rapid-cycle equipment that requires high shaft velocity. Power and feedback conductors are routed on \u003cstrong\u003eside B\u003c\/strong\u003e, and the circular connector helps keep cable routing compact. This arrangement also helps preserve clearance around the motor body in confined spaces. Rotor alignment to the driven machine is aided by a centering diameter of \u003cstrong\u003e40 mm\u003c\/strong\u003e, and the motor uses standard balancing. Speed and position are reported through \u003cstrong\u003eresolver feedback\u003c\/strong\u003e, giving analog sinusoidal signals that the controller can process even under electrical noise.\u003c\/p\u003e\u003cp\u003eMachine safety is supported by a blocking brake that exerts \u003cstrong\u003e1.0 Nm\u003c\/strong\u003e when power is removed, helping prevent uncommanded rotation on vertical or suspended shafts. The output uses a \u003cstrong\u003eplain shaft\u003c\/strong\u003e, which interfaces with couplings or pulleys, and the rear side does not include an auxiliary shaft end. Because the shaft end is plain rather than keyed, torque is typically transferred through a matching friction or clamping element. There is no shaft seal, so the installation must avoid fluid ingress along the journal. The motor length code \u003cstrong\u003eC\u003c\/strong\u003e and frame size \u003cstrong\u003e025\u003c\/strong\u003e give the unit a compact geometry for mounting inside tight automation enclosures.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unused Surplus","offer_id":52056175018285,"sku":null,"price":7250.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025c-n-100-n2g-040fb1__288f462a-efd7-454f-a2ac-865c26d62f8f.webp?v=1777966966","url":"https:\/\/servosupplier.com\/products\/mdd025c-n-100-n2g-040fb1","provider":"Servo Supplier","version":"1.0","type":"link"}