{"product_id":"mdd025c-n-100-n2g-040ff0","title":"MDD025C-N-100-N2G-040FF0","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025C-N-100-N2G-040FF0\u003c\/strong\u003e is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts regulated current from the drive into fast rotary motion for pick-and-place heads, compact spindles, and other high-cycle automation axes. Its compact housing supports installation where space is limited and where low inertia is important for short cycle times. The motor is suited to applications that need high speed with modest continuous torque in a small frame.\u003c\/p\u003e\u003cp\u003eThe motor delivers a continuous standstill torque of \u003cstrong\u003e0.90 Nm\u003c\/strong\u003e, which provides stable holding force during dwell periods. During operation, it can reach a nominal speed of \u003cstrong\u003e10,000 rpm\u003c\/strong\u003e, supporting fast acceleration in lightweight motion systems. A centering diameter of \u003cstrong\u003e40 mm\u003c\/strong\u003e helps align the flange accurately with the mating machine surface. Power and feedback conductors exit on the \u003cstrong\u003eright side\u003c\/strong\u003e, which can simplify cable routing in compact gantries and other confined layouts. Electrical connection is made through a \u003cstrong\u003econnecting cable with a coupling unit\u003c\/strong\u003e, allowing the motor to be disconnected without disturbing the entire cable run.\u003c\/p\u003e\u003cp\u003eThe model is supplied \u003cstrong\u003ewithout a blocking brake\u003c\/strong\u003e, so any vertical or suspended load must be held by external locking hardware or by drive-generated torque when power is available. It uses a \u003cstrong\u003eplain shaft\u003c\/strong\u003e, which is intended for friction-fit hubs and avoids the stress concentration associated with a keyway. The motor is also built \u003cstrong\u003ewithout a shaft seal\u003c\/strong\u003e, so it should be installed in a clean area that is protected from fluid splash at the shaft opening. Position feedback is provided by \u003cstrong\u003eresolver feedback\u003c\/strong\u003e, which supplies rotor angle information across the speed range and remains reliable under typical temperature variation in small motor frames. This feedback method supports stable speed control and accurate positioning in compact servo applications.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unused Surplus","offer_id":52056175247661,"sku":null,"price":7250.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025c-n-100-n2g-040ff0__72d8e2b6-b7bf-47f9-891c-9d135a4bb3cc.webp?v=1777966989","url":"https:\/\/servosupplier.com\/products\/mdd025c-n-100-n2g-040ff0","provider":"Servo Supplier","version":"1.0","type":"link"}