{"product_id":"mdd025c-n-100-n2g-040ml1","title":"MDD025C-N-100-N2G-040ML1","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025C-N-100-N2G-040ML1\u003c\/strong\u003e is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it receives commanded currents from an inverter and converts them into rotary motion for positioning or high-cycle tasks in automated machinery. Its elevated nominal speed and compact 025 frame make the unit suitable for pick-and-place heads, miniature spindles, and other equipment that needs rapid yet accurately controlled rotation. The motor is intended for digitally controlled axes where rapid response and accurate positioning are both important. The compact frame also helps it fit small moving assemblies with limited mounting space.\u003c\/p\u003e\u003cp\u003eThe motor provides a continuous standstill torque of \u003cstrong\u003e0.90 Nm\u003c\/strong\u003e, and it reaches a nominal speed of \u003cstrong\u003e10000 rpm\u003c\/strong\u003e. A centering diameter of \u003cstrong\u003e40 mm\u003c\/strong\u003e aligns the motor to mounting collars so the air gap remains even under load. Power and feedback leads exit on the \u003cstrong\u003eleft side\u003c\/strong\u003e, and the electrical interface uses a plug-in \u003cstrong\u003econnector\u003c\/strong\u003e that simplifies cable routing in tight panels. Rotor position is returned to the drive through \u003cstrong\u003eresolver feedback\u003c\/strong\u003e, enabling closed-loop control with high angular resolution. This arrangement supports stable motion during repeated starts and stops. A keyed shaft transfers torque directly to couplings or pulleys.\u003c\/p\u003e\u003cp\u003eAn integrated blocking brake provides \u003cstrong\u003e1.0 Nm\u003c\/strong\u003e of holding torque, which helps prevent axis drift when power is removed. The motor uses length code \u003cstrong\u003eC\u003c\/strong\u003e, which gives it a longer active stack while keeping the frame narrow. It has standard balancing and a standard housing, so no special mechanical finish is indicated. The shaft is supplied \u003cstrong\u003ewithout a shaft seal\u003c\/strong\u003e, reducing friction at the output end. A single shaft end is provided, with no extension on side B, which keeps the coupling close to the front bearing.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unstocked","offer_id":52038688702765,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025c-n-100-n2g-040ml1__5c6a256f-4110-45cb-b9ec-da4a8780de5b.webp?v=1777967066","url":"https:\/\/servosupplier.com\/products\/mdd025c-n-100-n2g-040ml1","provider":"Servo Supplier","version":"1.0","type":"link"}