{"product_id":"mdd025c-n-100-n2k-040gl1","title":"MDD025C-N-100-N2K-040GL1","description":"\u003cp\u003eThe \u003cstrong\u003eMDD025C-N-100-N2K-040GL1\u003c\/strong\u003e is a compact synchronous motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it delivers rapid rotary motion to pick-and-place heads, small indexing tables, and semiconductor handling stations where quick acceleration and repeatable positioning are required. Its 025 frame size pairs a modest rotor diameter with a C-length stack, and the standard housing fits narrow enclosures without requiring extra cooling hardware or unusual mounting space.\u003c\/p\u003e\u003cp\u003eAt standstill, the motor delivers a continuous torque of \u003cstrong\u003e0.90 Nm\u003c\/strong\u003e, sustaining the load while copper and lamination losses remain within thermal limits. Once driven by the inverter, the rotor reaches a nominal speed of \u003cstrong\u003e10,000 rpm\u003c\/strong\u003e, providing the surface speed needed for fine incremental positioning at high cycle rates. A blocking brake rated at \u003cstrong\u003e1.0 Nm\u003c\/strong\u003e prevents back-driving of vertical axes when mains power is disabled. Power and feedback leads exit on the \u003cstrong\u003eleft side\u003c\/strong\u003e through a sealed connector, which helps simplify cable routing in slender control cabinets. Precise concentricity is achieved with a \u003cstrong\u003e40 mm\u003c\/strong\u003e centering diameter in the flange, and the motor uses a standard balance grade to keep vibration low across the speed range. A radial shaft seal protects the front bearing from coolant splash.\u003c\/p\u003e\u003cp\u003eClosed-loop control is supported by an \u003cstrong\u003eintegrated absolute encoder\u003c\/strong\u003e that provides multi-turn position data without requiring a homing sequence after startup. For drives that prefer analog interpolation, simultaneous \u003cstrong\u003eresolver feedback\u003c\/strong\u003e is available, allowing dual feedback channels in the same motor package. Torque is transmitted through a \u003cstrong\u003eplain shaft\u003c\/strong\u003e made to h6 tolerance, and the motor is supplied \u003cstrong\u003ewithout a side B shaft end\u003c\/strong\u003e so the rear face remains clear for the brake and cable hardware.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unstocked","offer_id":52038692307245,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd025c-n-100-n2k-040gl1__4ccbbec1-a80d-4693-a729-2c573a284031.webp?v=1777967168","url":"https:\/\/servosupplier.com\/products\/mdd025c-n-100-n2k-040gl1","provider":"Servo Supplier","version":"1.0","type":"link"}