{"product_id":"mdd041c-n-100-n2g-050pb0","title":"MDD041C-N-100-N2G-050PB0","description":"\u003cp\u003eThe \u003cstrong\u003eMDD041C-N-100-N2G-050PB0\u003c\/strong\u003e is a motor for digital drive controllers produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It serves as the rotary actuator in compact automation axes. It supplies precise speed and torque so a drive controller can execute positioning, indexing, or coordinated motion tasks on packaging, printing, or small handling equipment.\u003c\/p\u003e\u003cp\u003eThis model reaches a nominal operating speed of \u003cstrong\u003e10000 rpm\u003c\/strong\u003e, allowing high surface velocities on lightweight mechanisms. At standstill it can deliver \u003cstrong\u003e2.05 Nm\u003c\/strong\u003e continuously, which is the stall load the drive can hold without thermal overload. The rotor uses standard balancing, and the flange includes a centering diameter of \u003cstrong\u003e50 mm\u003c\/strong\u003e for accurate location against gearboxes or mounting plates. Power and feedback plugs are oriented on \u003cstrong\u003eSide B\u003c\/strong\u003e, which helps cable routing inside narrow cabinets. A sealed \u003cstrong\u003eConnector\u003c\/strong\u003e interface is used instead of flying leads, which helps maintain ingress protection. The motor has size 041 and length code C, which correspond to the stator diameter and active stack used in this model.\u003c\/p\u003e\u003cp\u003eFeedback signals are produced by an integrated \u003cstrong\u003eresolver feedback\u003c\/strong\u003e unit, giving analog sine-cosine data for high-resolution interpolation in the controller. For holding duties, the unit is supplied \u003cstrong\u003ewithout a blocking brake\u003c\/strong\u003e, so any static load must be secured electrically or with an external clamp. The shaft follows the DIN profile and is described here simply as a \u003cstrong\u003ekeyway\u003c\/strong\u003e, ensuring positive torque transfer to couplings. A factory-installed \u003cstrong\u003eshaft seal\u003c\/strong\u003e prevents oil or coolant from migrating along the shaft bore into the stator cavity, and the housing uses the standard non-cooled design for normal ambient conditions. The shaft end is single-sided, so there is no secondary projection on side B to interfere with tight machine frames.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Refurbished","offer_id":52056189763885,"sku":null,"price":11708.46,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd041c-n-100-n2g-050pb0__5f442164-bc2c-46d3-8e5d-079d3147e3ca.webp?v=1777967499","url":"https:\/\/servosupplier.com\/products\/mdd041c-n-100-n2g-050pb0","provider":"Servo Supplier","version":"1.0","type":"link"}