{"product_id":"mdd065a-n-040-n2l-095gl0","title":"MDD065A-N-040-N2L-095GL0","description":"\u003cp\u003eThe Bosch Rexroth Indramat \u003cstrong\u003eMDD065A-N-040-N2L-095GL0\u003c\/strong\u003e is a synchronous servo motor in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts electrical commands from the associated drive into precise rotary motion for positioning and velocity control in industrial automation equipment. This design is well suited to pick-and-place axes, indexing assemblies, and light conveyor sections where accurate starts and stops are important. Its compact stator and rare-earth magnet excitation give the unit a lightweight design suited to installations that need fast response and moderate continuous output.\u003c\/p\u003e\u003cp\u003eAt standstill, the rotor can apply \u003cstrong\u003e0.8 Nm\u003c\/strong\u003e of continuous torque, which indicates the thermal current limit of the windings when no external cooling is used. During operation, the shaft reaches a nominal speed of \u003cstrong\u003e4000 rpm\u003c\/strong\u003e, which marks the synchronous operating point used for system sizing and gear selection. Mechanical alignment is aided by a centering pilot of \u003cstrong\u003e95 mm\u003c\/strong\u003e in diameter, and cabling enters from the \u003cstrong\u003eleft\u003c\/strong\u003e side through a molded single-plug connector. Position and velocity information return to the drive through \u003cstrong\u003edigital servo feedback (DSF)\u003c\/strong\u003e, allowing closed-loop control without a secondary encoder. The motor uses length code A, which indicates the shortest available stack height in the 65 mm frame.\u003c\/p\u003e\u003cp\u003eThe motor uses a \u003cstrong\u003e065\u003c\/strong\u003e frame with a \u003cstrong\u003eplain shaft\u003c\/strong\u003e, so couplings can slide on without keyways or extra machining. This shaft arrangement supports direct coupling where a keyed connection is not required. A \u003cstrong\u003eshaft seal\u003c\/strong\u003e sits behind the front bearing to limit lubricant migration and help block dust or coolant entry. The rotor is supplied \u003cstrong\u003ewithout a blocking brake\u003c\/strong\u003e, which keeps the layout compact and leaves holding torque to the drive or external machine hardware when the axis is stopped. The shaft end is standard on side A only, and the housing and balancing are both standard for this motor series.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Refurbished","offer_id":52056189796653,"sku":null,"price":3926.31,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd065a-n-040-n2l-095gl0__2f092790-31cd-44f6-8116-405b893d3d61.webp?v=1777967538","url":"https:\/\/servosupplier.com\/products\/mdd065a-n-040-n2l-095gl0","provider":"Servo Supplier","version":"1.0","type":"link"}