{"product_id":"mdd065a-n-040-n2l-095pr1","title":"MDD065A-N-040-N2L-095PR1","description":"\u003cp\u003eThe \u003cstrong\u003eMDD065A-N-040-N2L-095PR1\u003c\/strong\u003e is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded AC current into regulated shaft motion for positioning tasks in automated machinery. The frame follows size code 065 and uses a standard housing that simplifies mounting in compact automation cells, pick-and-place heads, or small transfer lines. This motor layout is suited to closed-loop axes that need repeatable motion and a compact installation footprint.\u003c\/p\u003e\u003cp\u003eAt standstill, the rotor can deliver \u003cstrong\u003e0.8 Nm\u003c\/strong\u003e of continuous torque, allowing fixtures or light loads to be held without overheating. When energized at rated frequency, the shaft reaches a nominal speed of \u003cstrong\u003e4000 rpm\u003c\/strong\u003e, which suits many mid-speed axes in packaging or electronics assembly. A centering diameter of \u003cstrong\u003e95 mm\u003c\/strong\u003e aligns the flange to the machine plate, while the power and feedback conductors exit on the \u003cstrong\u003eright side\u003c\/strong\u003e through a sealed \u003cstrong\u003econnector\u003c\/strong\u003e. Standard dynamic balancing helps reduce vibration across the speed range, and the A length code keeps the body short where space behind the mounting face is limited. The housing is the standard closed variant, and a shaft seal is fitted to limit the ingress of coolant or dust along the rotating interface.\u003c\/p\u003e\u003cp\u003eFor power-off holding and vertical axes, the motor is supplied with a blocking brake that exerts \u003cstrong\u003e3.0 Nm\u003c\/strong\u003e of static torque on the shaft. Position data is returned to the drive through \u003cstrong\u003edigital servo feedback (DSF)\u003c\/strong\u003e, allowing the controller to monitor rotor position during operation. The output shaft uses a \u003cstrong\u003ekeyway\u003c\/strong\u003e and is provided only on side A, leaving the opposite end blank. Motor size \u003cstrong\u003e065\u003c\/strong\u003e helps keep inertia low for rapid acceleration, and the internal shaft seal helps retain lubricant inside the bearing cavity.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Refurbished","offer_id":52056189993261,"sku":null,"price":1907.37,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd065a-n-040-n2l-095pr1__1ba4a79a-e7a2-41bf-a880-ce7e1af8cad2.webp?v=1777967550","url":"https:\/\/servosupplier.com\/products\/mdd065a-n-040-n2l-095pr1","provider":"Servo Supplier","version":"1.0","type":"link"}