{"product_id":"mdd071a-n-040-n2t-095pb1","title":"MDD071A-N-040-N2T-095PB1","description":"\u003cp\u003eThe \u003cstrong\u003eMDD071A-N-040-N2T-095PB1\u003c\/strong\u003e synchronous motor is built by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts electrical commands into precise mechanical motion for automated stations such as packaging lines and pick-and-place gantries. The compact A-length frame minimizes the installation envelope, while the standard housing allows direct installation without special vibration isolation. Power and feedback enter through a screened connector system, which reduces wiring complexity on modular machines and helps keep panel depth low in compact cells.\u003c\/p\u003e\u003cp\u003eUnder continuous stall conditions, the rotor delivers \u003cstrong\u003e2.2 Nm\u003c\/strong\u003e of torque. The motor has a nominal speed of \u003cstrong\u003e4000 rpm\u003c\/strong\u003e, giving the drive a predictable operating range for positioning and speed control. A built-in blocking brake supplies \u003cstrong\u003e3.0 Nm\u003c\/strong\u003e of holding torque so vertical axes remain locked when power is removed. Position feedback is handled by an \u003cstrong\u003eintegrated multi-turn absolute encoder\u003c\/strong\u003e, which retains position information over multiple revolutions, and the controller uses \u003cstrong\u003edigital servo feedback (DSF)\u003c\/strong\u003e for high-resolution synchronization. A shaft seal is fitted to limit lubricant migration, and the standard balancing grade keeps residual vibration within DIN limits.\u003c\/p\u003e\u003cp\u003eThe flange centering diameter measures \u003cstrong\u003e95 mm\u003c\/strong\u003e, which supports precise alignment during installation. Power and signal conductors exit on the motor’s rear right face in a \u003cstrong\u003eSide B\u003c\/strong\u003e orientation, which simplifies cable routing in tight cabinets, and a sealed connector set helps protect the connection area. The single-ended output shaft uses a \u003cstrong\u003ekeyway\u003c\/strong\u003e to transmit torque and has no extension on the opposite side, which matches the standard single-shaft arrangement. The motor size code is \u003cstrong\u003e071\u003c\/strong\u003e, and the painted outer casing tolerates typical factory ambient conditions.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unstocked","offer_id":52052987019565,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd071a-n-040-n2t-095pb1__0b44d08f-09b6-4e86-bfa6-86d3ae397931.webp?v=1778570982","url":"https:\/\/servosupplier.com\/products\/mdd071a-n-040-n2t-095pb1","provider":"Servo Supplier","version":"1.0","type":"link"}