{"product_id":"mdd071b-n-060-n2s-095pb2","title":"MDD071B-N-060-N2S-095PB2","description":"\u003cp\u003eThe \u003cstrong\u003eMDD071B-N-060-N2S-095PB2\u003c\/strong\u003e synchronous servo motor is produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Designed to operate with digital drive controllers, the unit converts electrical commands into precise mechanical rotation for positioning or speed-regulated tasks on automated machinery and assembly equipment. Its synchronous design supports accurate response during repeated start-stop motion. It is suitable for feed axes, handling units, and other servo-driven mechanisms where controlled acceleration and stable speed regulation are important.\u003c\/p\u003e\u003cp\u003eThe motor body seats against mounting hardware through a centering diameter of \u003cstrong\u003e95 mm\u003c\/strong\u003e, ensuring alignment between the stator frame and the driven load. At standstill, it can deliver a continuous torque of \u003cstrong\u003e4.4 Nm\u003c\/strong\u003e, so a control system can hold or slowly index parts without overheating. During normal operation, the rotor can reach a nominal speed of \u003cstrong\u003e6000 rpm\u003c\/strong\u003e, which provides a high-speed operating point for gearbox selection and inverter frequency planning. Power and feedback conductors exit on \u003cstrong\u003eSide B\u003c\/strong\u003e of the housing, a layout that simplifies cable routing when the motor is fixed inside compact cabinets. The motor uses a single \u003cstrong\u003econnector\u003c\/strong\u003e interface that combines phase, earth, and signal contacts in one mating point.\u003c\/p\u003e\u003cp\u003eA blocking brake integrated at the non-drive end supplies a holding torque of \u003cstrong\u003e6.5 Nm\u003c\/strong\u003e, preventing axis drift once power is removed and allowing vertical loads to remain suspended without separate clamping devices. Dynamic balance is classified as \u003cstrong\u003eStandard\u003c\/strong\u003e, which helps reduce residual vibration for general-purpose servo axes. The output shaft is machined with a \u003cstrong\u003ekeyway\u003c\/strong\u003e so pulleys or couplings can be secured by standard keyed hubs, and a fitted \u003cstrong\u003eshaft seal\u003c\/strong\u003e limits lubricant migration and airborne particle ingress into the bearing cavity. This arrangement supports stable torque transfer while helping protect the bearing area from contamination during regular operation.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unstocked","offer_id":52052999209261,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd071b-n-060-n2s-095pb2__e2fc23ad-7807-41a5-983b-35cbe6415d94.webp?v=1778571283","url":"https:\/\/servosupplier.com\/products\/mdd071b-n-060-n2s-095pb2","provider":"Servo Supplier","version":"1.0","type":"link"}