{"product_id":"mdd071c-n-030-n2l-095b0","title":"MDD071C-N-030-N2L-095B0","description":"\u003cp\u003eThe \u003cstrong\u003eMDD071C-N-030-N2L-095B0\u003c\/strong\u003e is a synchronous servo motor produced by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers in industrial automation cells, packaging lines, and material-handling axes that require fast position and velocity control. The motor combines a permanent-magnet rotor with electronic commutation to deliver repeatable speed and torque during closed-loop motion control.\u003c\/p\u003e\u003cp\u003eThe motor reaches a nominal speed of \u003cstrong\u003e3000 rpm\u003c\/strong\u003e, allowing it to operate in high-cycle applications with common inverter settings. At standstill, it provides \u003cstrong\u003e6.6 Nm\u003c\/strong\u003e of continuous torque, which supports static loads during clamping or dwell phases. A centering diameter of \u003cstrong\u003e95 mm\u003c\/strong\u003e aligns the flange to machine frames and helps maintain concentric mounting with minimal runout. Position data are supplied through \u003cstrong\u003edigital servo feedback (DSF)\u003c\/strong\u003e, giving the controller high-resolution rotor angle information for accurate current regulation. Frame size \u003cstrong\u003e071\u003c\/strong\u003e identifies the external stator size, helping the motor fit machine layouts where installation space is limited but stable servo performance is still required.\u003c\/p\u003e\u003cp\u003eDynamic operation is supported by \u003cstrong\u003estandard balancing\u003c\/strong\u003e, which helps keep residual vibration low for couplings and belt-driven loads. The \u003cstrong\u003estandard housing\u003c\/strong\u003e uses the normal enclosure form used for this motor type, allowing direct installation on common gearboxes or mounting plates. A stator stack with \u003cstrong\u003elength code C\u003c\/strong\u003e increases the active iron length compared with shorter versions, adding thermal mass for applications with extended acceleration periods. The motor uses a \u003cstrong\u003estandard shaft end\u003c\/strong\u003e in a single-ended arrangement, so there is no shaft extension on side B. This layout keeps the non-drive side compact and leaves the main coupling point at one end of the motor.\u003c\/p\u003e","brand":"Bosch Rexroth Indramat","offers":[{"title":"Unstocked","offer_id":52053002387757,"sku":null,"price":0.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0747\/7696\/9517\/files\/mdd071c-n-030-n2l-095b0__2cce089f-b07f-4143-8f8c-4b9669d379b0.webp?v=1778571351","url":"https:\/\/servosupplier.com\/products\/mdd071c-n-030-n2l-095b0","provider":"Servo Supplier","version":"1.0","type":"link"}