Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-M00306-M1EC-0000

AKD-M00306-M1EC-0000

by Kollmorgen
$2,922.75 - $2,922.75
$2,922.75
$2,922.75 - $2,922.75
$2,922.75
In Stock, Ships 3 - 5 Days
The Kollmorgen AKD-M00306-M1EC-0000 servo drive is a high-performance, Ethernet-supported motion controller. The unit incorporates dynamic braking, managed by the DRV.DISMODE parameter, and allows for the external connection of a regen resistor, enabling a peak regen power of 5.4 kW for a second. The servo drive can directly control a 24 V holding brake of the connected motor and includes a unique one-character and standard two-character display. The device possesses exclusive IP and MAC addresses, with the MAC address displayed on the nameplate. Functioning with DHCP/AutoIP when the RS1 rotary switch is set to 0, it supports connections with other servo drives of the same series. The product also includes an SD card slot compatible with SDSC and SDHC cards, pre-formatted by the manufacturer. The device details any faults on its two-character display. The connection quality can be inferred from the illumination of LEDs on the industrial PC and X32 RJ-45 connector. Servicing is simple using the KAS IDE software.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product ID: AKD-M00306-M1EC-0000
  • Use: Servo Drive
  • Ethernet Support: Yes
  • Dynamic Braking Function: Yes
  • Internal Regen Resistor: No
  • Peak Regen Power: 5.4 kW with external regen resistor
  • Control: Direct control of 24 V holding brake of connected motor
  • Display: One-character seven-segment and two character standard display
  • Unique Addresses: IP and MAC
  • Boot Mode: Recovery mode with B2 push-button
  • SD Card Slot: Yes, supporting SDSC and SDHC type SD cards
  • Rotary Switch: RS1, set to 0 for DHCP/AutoIP address
  • Series Connection: Supports connection of other servo drives as slave drives
  • Network: PLC open and pipes network
  • Housing: Extended width
  • Interface Connection: Ethernet cable between service interface and the Ethernet interface of the industrial PC
  • Fault Code Display: Letter F or E on left side of two-character display, numerical code on right side
  • Software: Kollmorgen KAS IDE software for troubleshooting.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204