Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKM41H-EKMNEH00

AKM41H-EKMNEH00

by Kollmorgen
$0
$5,960.00 - $5,960.00
$5,960.00
$5,960.00 - $5,960.00
$5,960.00
In Stock, Ships 3 - 5 Days
 More payment options
Kollmorgen's AKM41H-EKMNEH00 is a high-functioning servomotor, manufactured without a holding brake and brushes, which results in unchanged length and electronic commutation respectively, by the affiliated servo amplifier. Fitted with ball bearings, any operational sound signals should prompt a device turn-off and bearing replacement. Cleaning of the motor's housing must avoid water and other liquid-based agents, instead favoring isopropanol or similar substances. The servomotor is equipped with a 0.5m shielded cable featuring IP20 connectors, adorned with a matte black enamel coating on its 84mm flange size. It operates with a 2.06 Nm standstill torque and 5.60 A standstill current, on a maximum mains voltage of 480 VAC, alongside a 22.4 A peak current, 6.36 Nm peak torque and 13-minute thermal time constant. Its 0.81 J rotor moment of inertia requires knowledgeable personnel to operate, avoiding disconnection when live and ensuring the surface temperature is below 40°C prior to handling.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Model: AKM41H-EKMNEH00
  • Product Type: Servomotor
  • Shaft Type: Open Keyway
  • Holding Brake: No
  • Brushes: No
  • Bearing Type: Ball Bearings
  • Cleaning: Isopropanol or similar (no water)
  • Cable: 0.5m shielded with IP20 connectors
  • Flange Size: 84 mm
  • Coating: Matt black enamel
  • Standstill Torque: 2.06 Nm
  • Standstill Current: 5.60 A
  • Maximum Mains Voltage: 480 VAC
  • Peak Current: 22.4 A
  • Peak Torque: 6.36 Nm
  • Rotor Moment of Inertia: 0.81 J
  • Thermal Time Constant: 13 minutes
  • Commissioning: Personnel with electrical engineering or drive technology knowledge
  • Safety Measures: No undoing connections when live, beware of residual charge, ensure surface temperature below 40°C prior to touching

Get In Contact

Email: sales@servosupplier.com

Phone Number: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Servo Supplier is not an authorized distributor. We sell new surplus and refurbished products, all warranties are with Servo Supplier and not the manufacturer.