Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of CSH01.2C-NN-ENS-MEM-CCD-NN-S-NN-FW

CSH01.2C-NN-ENS-MEM-CCD-NN-S-NN-FW

by Bosch Rexroth Indramat
$2,865.63 - $2,865.63
$2,865.63
$2,865.63 - $2,865.63
$2,865.63
In Stock, Ships 3 - 5 Days
The Bosch Rexroth Indramat CSH01.2C-NN-ENS-MEM-CCD-NN-S-NN-FW is an advanced control section designed with a standard control panel on the front. This device, with a line code of 1, has no safety technology and requires specific conditions for optimal performance, including stable temperatures and proper electrical grounding as per connection diagrams. The unit features conductive packaging, and it's essential only to connect with manufacturer-approved interfaces and components. This advanced control section includes an ENS encoder with an 11.6V supply voltage and a maximum output current of 500mA. It's operated with a maximum 400kHz input frequency for 5V-TTL or square-wave signals. The device and its controller must be immobile before entering the danger zone, and it should only be installed vertically. It must not be touched by bare hands due to its hot surface. All components with extra low-voltage circuits should comply with PELV requirements. This unit can be shipped to a chosen address.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: CSH01.2C-NN-ENS-MEM-CCD-NN-S-NN-FW
  • Line Code: 1
  • Safety Technology: None
  • Packaging: Conductive
  • Temperature Operation: No extreme temperature
  • Grounding Conductor: Permanent as per diagram
  • Protection: Closed housing
  • Leakage Current: Greater than 3.5mA
  • Location of Operation: Not near high-frequency equipment
  • Lifting Equipment: Required for transporting plus mounting
  • Control Panel: Standard, front side
  • Encoder ENS Supply Voltage: 11.6V
  • Encoder ENS Maximum Output Current: 500mA
  • Typical Inrush Current Rating: 4A
  • Shield Connection: Present, on housing of cross-communication module
  • Input Frequency: Maximum 400kHz for 5V-TTL or square-wave signals
  • Power Consumption: Does not affect inrush current
  • Installation Orientation: Vertical only
  • Surface: Hot, not to be touched with bare hands
  • SHipment: Possible to desired address.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204