Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
manufacturer image of HDC01.1-A040N-IB01-01-FW

HDC01.1-A040N-IB01-01-FW

by Bosch Rexroth Indramat
$3,884.13 - $3,884.13
$3,884.13
$3,884.13 - $3,884.13
$3,884.13
In Stock, Ships 1 - 2 Days
The HDC01.1-A040N-IB01-01-FW drive controller, a product by Bosch Rexroth Indramat, is designed for specific ambient conditions. CE Certified and cUL Listed, it features three shielded connections on the front, including the X1 connector for the control voltage supply. Additional sensors and actuators may be needed for motor control and monitoring. Its bottom part features a crimped seal. The device could potentially malfunction due to component failure or software errors, leading to hazardous movements. Operation should cease if the emergency stop function is not working. The power connection must be isolated with a start-inhibit system to prevent accidental startups. Extra secure measures such as a clamping mechanism are required for vertical axes. Power should be disconnected during extended periods of inactivity or maintenance. It can be installed up to 1,000m above sea level. It is connected to an Interbus interface and features six diagnostic displays.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Model: HDC01.1-A040N-IB01-01-FW
  • Certification: CE Certified and cUL Listed
  • Connections: Three shielded connections
  • X1 Connector: Used to connect control voltage supply
  • Additional Components: May need additional sensors and actuators
  • Safety Feature: Crimped seal at bottom
  • Emergency Stop Function: Must be in working condition
  • Power Connection Isolation: Through start-inhibit system
  • Positioning: Away from radios, remote controls, and high-frequency equipment
  • Maximum Operating Height: 1,000m above sea level
  • Design: No special design
  • Communication Interface: InterBus
  • Incoming Connector: X40 male 9-pin D-Sub
  • Outgoing Connector: X41 female 9-pin D-Sub
  • Diagnostic Displays: Six in two columns
  • Signal Isolation: Must be galvanically isolated from connector signals.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204