Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MDD093C-N-030-N2M-110GA2

MDD093C-N-030-N2M-110GA2

by Bosch Rexroth Indramat
$3,301.81 - $3,301.81
$3,301.81
$3,301.81 - $3,301.81
$3,301.81
Available, Shipping Varies
The MDD093C-N-030-N2M-110GA2 is an AC servo motor produced by Bosch Rexroth Indramat renowned for manufacturing quality products that enhance system performance. This model comes with a balance class N, a plain output shaft, and lubrication protection sealing ring. Suitable for weatherproof conditions, its operational temperature should be between 0 and +45 degrees Celsius, in locations up to 1,000 meters above sea level. The motor conforms to IP65 protection standards against dust and water exposure, and boasts a thermal constant of 50 minutes due to its surfaced cooling design. It requires a controller for peak performance and weighs 22 kilograms. The model comes with an A-side power connection and a 1.1-kilogram holding brake. Capable of delivering a continuous torque of 19.5 Nm at a standstill current of 32.2 mA, it produces a maximum torque of 60.6 Nm at 3000 rpm thanks to lubricated bearings. It also features a surface-cooled housing and digital servo feedback with an integrated multiturn encoder to monitor rotor's speed and position.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Model: MDD093C-N-030-N2M-110GA2
  • Balance Class: N
  • Output Shaft: Plain
  • Sealing Ring: Top
  • Storage Temperature Range: -20 to +80 degrees Celsius
  • Transit Temperature Range: -20 to +80 degrees Celsius
  • Operating Conditions: Weatherproof, 0 to +45 degrees Celsius
  • Placement Altitude: up to 1,000 meters
  • Protection Requirements: IP65
  • Thermal Time Constant: 50 minutes
  • Cooling: Surface
  • Weight: 22 kilograms
  • Power Connection: A-side
  • Holding Brake: 1.1-kilogram
  • Release Delay of The Holding Brake: 30 milliseconds
  • Clamping Delay of The Holding Brake: 70 milliseconds
  • Continuous Torque: 19.5 Nm
  • Continuous Current at Standstill: 32.2 mA
  • Maximum Torque: 60.6 Nm
  • Maximum Speed: 3000 rotations per minute
  • Feedback: Digital servo feedback with integrated multiturn encoder
  • Housing: Surface-cooled

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204