Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of CSH01.2C-PB-EN1-EN2-CCD-L1-S-NN-FW

CSH01.2C-PB-EN1-EN2-CCD-L1-S-NN-FW

by Bosch Rexroth Indramat
Request a quote
The CSH01.2C-PB-EN1-EN2-CCD-L1-S-NN-FW is a highly reliable and safe advanced control section designed and manufactured by industry leader Bosch Rexroth Indramat. Primarily intended for use in industrial settings, it incorporates various interfaces to facilitate application-specific use of the drive controller. Specific and approved firmware must be used with this device to ensure optimal performance. The unit is designed for use within specific specifications and technical data. For maximum lifespan and performance, the control section should be stored in a cool, dry area. Installation of the device must abide by the EMC requirements and requires batteries for the control panel operation. It also features a discharge time of 30 minutes for its live capacitors after the power supply is disconnected. It is equipped with a PROFIBUS interface compliant with DIN EN 50 170 specifications, an analog input, and a Normally Open relay contact. The product can be delivered to a location of choice and should be handled using appropriate protective equipment for safety.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Name: CSH01.2C-PB-EN1-EN2-CCD-L1-S-NN-FW
  • Product Type: Advanced Control Section
  • Use Environment: Industrial Locations
  • Firmware: Only Specified by Manufacturer
  • Interface: Various for Application-specific Uses
  • Operation Specifications: Within Specified Technical Data
  • Intended Usage: Drive Controller
  • Storage Requirements: Cool and Dry Place
  • Installation Requirements: Compliance with EMC requirements
  • Power Supply: Batteries
  • Discharge Time: 30 minutes
  • Operation Limitations: Within drive controller or closed cabinet
  • Interface: PROFIBUS Interface (DIN EN 50 170)
  • Additional Outputs: One Analog Input and One Normally Open Relay Contact
  • Encoder: EnDat 2.1 / 1Vpp / TTL, 5 volts and 35 Ohms DC resistance
  • Protection Equipment: Required for unit handling
  • Connectors: PROFIBUS with connectable terminating resistor
  • Safety Mechanism: Configurable Starting Lockout
  • Packing: Conductive Packing

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204