Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of CSH01.3C-NN-EN1-EN2-CCD-NN-S-NN-FW

CSH01.3C-NN-EN1-EN2-CCD-NN-S-NN-FW

by Bosch Rexroth Indramat
Request a quote
The Bosch Rexroth Indramat CSH01.3C-NN-EN1-EN2-CCD-NN-S-NN-FW is a customizable control section equipped with a single axis and a CCD module in adherence to IEEE 802.3 standards. It should only be operated when enclosed inside its drive controller housing, and it must be handled properly to prevent damage. Connection points feature spring terminals and screw terminal blocks. In order to avoid electric interference, preventive measures while utilizing in residential premises are encouraged. The device must be installed upright and will only be commissioned after machine compliance with national regulations. Before operation, grounding of the unit is required and it supports protection via residual-current-operated circuit breakers. The presence of built-in monitoring functions prevents malfunction and a 15-minute cooling period is needed after power off. It's critical to use appropriate equipment for transportation and installation. The device is safely transported by trusted freight carriers. Product and safety guidelines should be fully understood before operation.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Model: CSH01.3C-NN-EN1-EN2-CCD-NN-S-NN-FW
  • Location: Fitted inside the power section
  • Configuration: One axis
  • Module Compliance: IEEE 802.3 standards
  • Connection Points: Equipped with spring terminals and screw terminal blocks
  • Usage Condition: Cannot be operated outside the drive controller housing
  • Storage: Conductive packaging only
  • Operation Requirement: Requires understanding of usage and safety instructions
  • Water Resistance: Not suitable for underwater operation
  • Interference: Can cause high-frequency interference in residential areas without suppression measures
  • Installation: Must be in an upright orientation
  • Commissioning Requirement: Machine compliance with national regulations
  • Grounding Requirement: Must be properly grounded
  • Main Operations: Supports operation at mains with protection using circuit breakers
  • Monitoring Functions: Incorporated in components
  • Safety Measures: Must be in safe standstill mode before entering danger zone
  • Cool Down Time: 15 minutes after power off
  • Transport Equipment: Use suitable equipment
  • Freight Carrier: Reputed carriers only.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204