Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of CSH02.1B-ET-EC-NN-S4-DA-NN-FW

CSH02.1B-ET-EC-NN-S4-DA-NN-FW

by Bosch Rexroth Indramat
Request a quote
Bosch Rexroth Indramat's CSH02.1B-ET-EC-NN-S4-DA-NN-FW is an advanced control section that requires stable temperature conditions for optimal functioning. Conforming to IEC 61800-3 specifications, it incorporates Category C3 components. Proper handling, including correct mounting, installation, transportation, and storage, is essential for safe operation. It is mandatory to ensure application compatibility with safety standards before using the device. Touching its housing during or post-operation, when the surface temperature exceeds 60 °C, can lead to burns. For cleaning, disconnecting from the power source is necessary. The device includes firmware rating plate and multipurpose analog inputs, and supports 1Vpp sin-cos encoders with either HIPERFACE or EnDat 2.1 interface. The product, which should be housed closed, can be connected to an HSZ01 safety zone module to establish a safety zone for up to 26 drive units. It features spring terminals and screw terminal blocks at its connection points.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Code: CSH02.1B-ET-EC-NN-S4-DA-NN-FW
  • Operating Conditions: Stable temperatures without extreme fluctuations
  • Component Category: C3
  • Safety Requirements: Application must adhere to relevant safety regulations
  • Danger Possibility: May cause burns when touched on hot housing surface
  • Grounding Conductors: Supports 2 equipment grounding conductors with more than 10 mm2 cross-section
  • Drive Controller: Moves dangerously during operation due to operator errors
  • Risk Assessment: Required before installation inside associated machine
  • Cleaning: Device must be disconnected from power supply
  • Surface Temperature: Over 60°C during and immediately after operation
  • Firmware: Has separate rating plate
  • Analog Inputs: Two multipurpose
  • Encoder Compatibility: Compatible with 1Vpp sin-cos encoders with HIPERFACE or EnDat 2.1 interface
  • Control Panel: Cannot be fitted with standard control panel
  • Housing: Should remain inside closed housing at all times
  • Safety Zone Module: Can be connected to an HSZ01 safety zone module with up to 26 drive units
  • Connection Points: Spring terminals and screw terminal blocks.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204