E4809 CNC Boards

The E4809-770-089-B is a CNC board by Okuma, part of the E4809 CNC Boards series. It operates at 50/60 Hz with a conductor cross-section of 25 mm² ...

The E4809-770-087-E from Okuma is a Power Supply Unit featuring 60W output and 24V DC voltage. Part of the E4809 CNC Boards series, it accepts 100-...

The E4809-770-087-C ultrasonic sensor by Okuma is part of the E4809 CNC Boards series. It features a sensing range of 400 mm to 6000 mm, an analog ...

The Okuma E4809-770-076-A from the E4809 CNC Boards series features custom connectors for Advantest ATE systems. It has 50 Ohm impedance, foil and ...

The E4809-770-075-A CNC Board from Okuma is part of the E4809 CNC Boards series. It delivers 80 A current, operates at 50/60 Hz frequency and handl...

The E4809-770-062-B spindle drive module from Okuma is part of the E4809 CNC Boards series. It operates on a 24 VDC input, delivers 750 W output po...

The E4809-770-050-A from Okuma is a single-phase CNC board operating on 200-230V and consuming 33/35W of power. Part of the E4809 CNC Boards series...

The E4809-770-020-A flexible flat cable by Okuma is part of the E4809 CNC Boards series. It measures 200 mm in length and 14 mm in width, supports ...

The E4809-719-008-A PSP board from Okuma's E4809 CNC Boards series is designed for industrial automation. It features plug-in PCB mounting, current...

The E4809-719-001-A board from Okuma's E4809 CNC Boards series features industrial-grade metals and specialized engineering plastics. It operates f...

The E4809-436-047-B is a servo amplifier from Okuma’s E4809 CNC Boards series. Operating on 200-230V AC at 50/60 Hz, it delivers up to 400W output ...

The E4809-436-033-C is a FR4 four-layer PCB assembly featuring a 16-bit data bus. Manufactured by Okuma in the E4809 CNC Boards series, it uses a 5...

The Okuma E4809-436-033-B is an input output module from the E4809 CNC Boards series, featuring rack/panel mounting and operating at 24V DC. Equipp...

The E4809-436-033-A power supply delivers 24V DC output at 10A capacity. Manufactured by Okuma as part of the E4809 CNC Boards series, it operates ...

The Okuma E4809-04U-003-A from the E4809 CNC Boards series is manufactured by Okuma and features IP67 protection. The 3-meter shielded cable is mad...

The E4809-045-236-A CPU controller board is rack or unit-mountable, weighs approximately 0.5 kg, tolerates humidity up to 90% without condensation,...

The Okuma E4809-045-231-A is a electronic module from the E4809 CNC Boards series. It operates at 24 VDC with 2.5 A capacity and handles digital in...

The Okuma E4809-045-206 board, part of the E4809 CNC Boards series by Okuma, is engineered for robust industrial automation control. This CNC inter...

The Okuma E4809-045-180-A is a robust heater element in the E4809 CNC Boards series, featuring a stainless steel sheath and overall length of 180 m...

The E4809-045-133-B from Okuma offers an output current of 10 A and supports an input voltage of 24 VDC. As part of the E4809 CNC Boards, this serv...

The E4809-045-131-A cable is manufactured by Okuma. Part of the E4809 CNC Boards series, it spans 45m and features a 40-pin edge connector. This PV...

The E4809-045-106-C is a CNC control board from Okuma. Part of the E4809 CNC Boards series, it uses an HD63B50P communication controller. A 16 MHz ...

The E4809-045-076-A is a PCB assembly manufactured by Okuma. Part of the E4809 CNC Boards series, it features SATA connectivity with an operating r...

The Okuma E4809-045-039-G circuit board from the E4809 CNC Boards series by Okuma is a robust direct-acting module designed for industrial automati...