KEB

The 04.SM 000-4400 motor from KEB is part of the SM Synchronous Servo Motors series. Built with permanent magnet synchronous technology, it operate...

The KEB 01.SM.000-3200 servo motor belongs to the SM Synchronous Servo Motors series and operates at a rated voltage of 190 volts. It delivers a no...

The 00.C6.CC1-0400 from KEB C6 Combicontrol Bus Couplers offers eight or sixteen analog channels with a 0-10V/+-10V range. It supports 100Mbit/s Et...

The 07.58.200 frequency inverter operates at a 220/240V input, uses a 20 A mains fuse, delivers 1.4kva output power, and supports a 2.5 mm2 wire cr...

The 07.56.210-0000 from KEB runs at 4.5A and uses 200-240V single-phase AC for reliable drive performance. Part of the F5 Combivert Axis Drives, it...

07.56.210 by KEB is a three-phase inverter from the F5 Combivert Axis Drives series. It is air cooled and has an efficiency of 95%. The device acce...

The 07.56.201 controller module from KEB is an integral part of the F5 Combivert Axis Drives series and is engineered for industrial automation app...

07.56.200 is a drive manufactured by KEB. It is part of the F5 Combivert Axis Drives series and offers an output capacity of 1.5KVA along with a 0....

07.10.800 is a versatile controller module offering electrical isolation and compact design. KEB manufactures this Combibox Clutch Brakes unit with...

The 07.10.570 clutch brake offers a moment of inertia of 2.98 x 10-4 kgm2, 90% efficiency, and is rated for a 2 HP load. Part of the Combibox Clutc...

The KEB 07.10.510 is a stainless steel brake from the Combibox Clutch Brakes series. Rated at 10 A current and operating at 50/60 Hz on 400 V AC, i...

The 07.10.440-4003 from KEB offers electrically isolated operation and a power supply range of 100-240 VAC. Part of the Combibox Clutch Brakes seri...

The 07.10.370-SLA by KEB is part of the Combibox Clutch Brakes series and features a clutch and electric brake design. It operates on 24 VDC for bo...

The 07.10.370-4001 Combibox Clutch Brake offers an IP55 rating, operates at 24V DC, and delivers a torque of 1.2 Nm. Belonging to the Combibox Clut...

The KEB 07.10.370-2FFU clutch-brake combination from the Combibox Clutch Brakes series is engineered for optimal performance in industrial automati...

07.10.370 is a clutch and electric brake made by KEB. It is part of the Combibox Clutch Brakes series with design 370 and 24 VDC operation. The clu...

The 06.P1.120-0647 controller module from KEB's P1 Encoders and Brakes series features electrically isolated interfaces. It operates on a power sup...

The 06.10.670 from KEB is a durable unit weighing 6 kg. Part of the Combibox Clutch Brakes, it runs at 50/60 Hz and stays below 45 C. It holds CE, ...

The 06.10.490 is a combination clutch brake from KEB in the Combibox Clutch Brakes series. It features a nominal air gap of 0.2 millimeters and pro...

The 06.10.370 from KEB's Combibox Clutch Brakes is a compact electromechanical brake engineered for industrial automation. It accommodates NEMA or ...

The 06.09.670 from KEB features a torque brake of 6/7 Nm and a flange diameter of 140 mm. Part of the Combibox Clutch Brakes, it operates at a rate...

The 06.06.440 brake features internal gear disengagement, an output shaft diameter of 20mm, and IP65 protection. Part of the Combibox Clutch Brakes...

The KEB 05.SM.R10-0009 servo motor belongs to the SM Synchronous Servo Motors series and operates at a rated voltage of 400V. It delivers a rated t...

05.S4.R31-1200 is an AC driver with IP54 protection supporting synchronous and asynchronous motors. KEB makes this drive in the S4 Combivert Servo ...