Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of MAD160C-0200-SA-C0-AH0-35-N1

MAD160C-0200-SA-C0-AH0-35-N1

by Bosch Rexroth Indramat
Request a quote
The MAD160C-0200-SA-C0-AH0-35-N1, a product of Bosch Rexroth Indramat, is an asynchronous motor with a maximum speed of 6,000 min-1. Featuring a plain overhead output shaft sans shaft sealing ring, the motor's cooling effect is achieved through surface ventilation. Safety is assured by ensuring proper installation and operation, which should exclusively be performed by trained professionals. The motor is designed to operate optimally under specific temperature conditions, and requires the drive controller to be programmed pre-startup for accurate application-specific functions. Noteworthy aspects of the device include an incremental encoder with 2,048 increments and versatile protection, which is IP 65-rated. The MAD160C-0200-SA-C0-AH0-35-N1 supports periodic operation in the S6 mode and has to be strategically located not exceeding 3000m above sea level. Adherence to DIN EN 60034-1 specifications ensures it has Class F or 155 insulation class. The device can withstand a jet of water sprayed on it from any direction at any angle, assuring durability.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • MAD Model: MAD160C-0200-SA-C0-AH0-35-N1
  • Maximum Speed: 6,000 min-1
  • Output Shaft: Plain overhead without shaft sealing ring
  • Cooling Method: Surface ventilation
  • Installation Conditions: Undamaged and properly working state
  • Installation Requirement: Drive controller must be programmed before startup
  • Operating Temperature: No extreme temperature fluctuations
  • Installer Qualifications: Only qualified and trained persons
  • Encoder: Incremental with 2,048 increments
  • Electrical Connector Location: A side of the housing
  • Protection Class: IP 65
  • Operation Mode: Periodic operation with S6
  • Elevation Limit: Not beyond 3000m above sea level
  • Housing Temperature Caution: Surface can be hot, safety apparel necessary
  • Temperature Change Speed: 0.5°C/min
  • Water Jet Protection: Yes
  • Motor Data Utilization Factor: To be multiplied if setup height or ambient temperature is exceeded
  • Mounting: No vertical installation with foot and flange
  • Insulation Class: Class F or 155 according to DIN EN 60034-1
  • Delivery Method: Through trusted delivery agents.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204