New products

The 8I64S200018.000-1 from B & R Automation features an 8 mm wall thickness and a tensile strength of 370-510 MPa. Part of the 8I6 ACOPOS Inver...

The 8BVI0028HWDS.000-1 is an air-cooled servo controller delivering 28 kW power. Manufactured by B & R Automation as part of the 8BVI Servo Con...

The 8BCM0015.1111A-0 is a motor cable from B & R Automation's CM16 Motor Cables series. It features a rated power of 1.5 kW, a nominal voltage ...

The 800-1720 module measures 6 5/16 inches in length. Manufactured by Copley Controls in the Accelnet CanOPEN Modules series, it supports CANopen a...

The 7EX470 is a CAN bus controller module manufactured by B & R Automation. Part of the System 2003 Controllers series, it features two isolate...

The 5PP320.0573-K05 features a 5.7-inch VGA TFT display with a resistive touchscreen. Manufactured by B & R Automation for the 5PP Power Panels...

The 5P91:508540.001-00 unit from B & R Automation is part of the 5PC Industrial Automation Units series. This steel alloy assembly features a z...

The B & R Automation 3IF772 from the System 2005 Controllers series consumes just 2W. It offers two CAN ports, an RS232 port configurable as th...

The Bosch Rexroth Indramat 2AD132C-B05OB1-BS03 AC motor belongs to the 2AD 3-Phase Induction Motors series and mounts via flange. It features axial...

The Sanyo Denki 20BM900MXTF3 is a robust BL Super Servo Motors series servo motor designed for industrial automation. Measuring approximately 36 in...

The KEB 16.F4.CCH-3280 inverter belongs to the F4 Combivert Frequency Inverters series and delivers 15kW of power. It supports a 200–240V voltage r...

The KEB 15.F4.C3E-4M00 frequency inverter from the F4 Combivert Frequency Inverters series offers 95.5% efficiency. It has a PI controller for prec...

The Kollmorgen 1203090 from the DDR Direct Drive Motors series is a high-precision direct drive motor featuring a sine encoder feedback device with...

The 12.F5.A1D-LAEA axis drive supports a 5 HP motor, operates from a 305-440 VAC input range, and delivers up to 1600 Hz output frequency. Part of ...

The Sanyo Denki 103H8221-0911 stepping motor belongs to the StepSyn Stepping Motors series, delivering 340W of output power with 92% efficiency. It...

The 05.S4.D11-3270 is a 2000 kW servo motor weighing 1500 kg. Manufactured by KEB in the S4 Combivert Servo Controllers series, it achieves 98% eff...

The VT-SSPA1-525-22/V0 amplifier from Bosch Rexroth Indramat is part of the VT-SSPA Plugin Proportional Amplifiers series. It offers analog control...

The VT-MSPA2-21/A5/000/000 from Bosch Rexroth Indramat operates at 24 VDC and consumes less than 48 W. Part of the VT-MSPA Drives, this amplifier f...

VT-MRMA1-1-11/V0/0 is a proportional amplifier manufactured by Bosch Rexroth Indramat. Part of the VT-VSPA Proportional Amplifiers series, it accep...

The VT-HNC100-1-14/134 from Bosch Rexroth Indramat supports an input voltage range of 18 to 36 VDC and consumes 8 watts of power. Part of the VT-HN...

The VT-5035-17 is an amplifier card manufactured by Bosch Rexroth Indramat, part of the VT-5000 IO Cards series. It supports an input voltage of 24...

The VT 5014 IO card operates at 21.6–33.6 VDC, measures 100×160 mm in euro-card format, uses a 32-pin DIN 41612 connector and weighs 0.15 kg withou...

The VT 5008 S16 IO card from Bosch Rexroth Indramat is part of the VT-5000 IO Cards series. It features a primary voltage of 500 V, a secondary vol...

The VT 3013 S35 analog amplifier features screw terminal connections, a voltage rating of 230 V AC, and a compact Euro-card design for easy integra...