New products

The EM8900-1001-0000 from Beckhoff offers a compact 110×100×25 mm design and 24 V DC input. Part of the EM Terminal Modules, it offers three channe...

The Beckhoff EM3702, part of the EM Terminal Modules series, measures differential pressure with a 0–7500 hPa range. It provides two measurement ch...

The EM3701 module from Beckhoff’s EM Terminal Modules series provides precise differential pressure measurement. It features a measuring range of -...

The EM2042 module features 16 outputs, D-sub connection technology, a rated load voltage of 24 V DC (-15%/+20%), and built-in reverse voltage prote...

The ELX9560 terminal features a 48 mm housing width and weighs approximately 200 g. Manufactured by Beckhoff as part of the EL EtherCAT Terminals s...

The ELX5151 from Beckhoff features IEC 60947-5-6 compliance and provides one encoder channel. Part of the EL EtherCAT Terminals, it delivers 8.2 V ...

The ELX3314 offers four differential thermocouple inputs with 0.1°C resolution per digit. Manufactured by Beckhoff as part of the EL EtherCAT Termi...

The ELX3204-0090 is a linear actuator with 90 mm stroke length and 500 N max load. Manufactured by Beckhoff in the EL EtherCAT Terminals series, it...

The ELX3204 features 4 differential inputs covering -200°C to +850°C measurement. Manufactured by Beckhoff in the EL EtherCAT Terminals series, it ...

The ELX3202 terminal from Beckhoff's EL EtherCAT Terminals series provides two differential inputs. It supports Pt and Ni RTD sensors, offers up to...

The ELX3152 is an EtherCAT terminal by Beckhoff in the EL EtherCAT Terminals series, offering two single-ended 0/4-20 mA inputs with 16-bit resolut...

The ELX2002 has two outputs with a maximum output current of 45 mA per channel and a total current limit of 80 mA. Manufactured by Beckhoff in the ...

The ELX1058 EtherCAT Terminal by Beckhoff is part of the EL EtherCAT Terminals series. It provides 8 NAMUR digital inputs or 2 digital inputs plus ...

The ELX1054 terminal has four NAMUR-compatible inputs, a typical open circuit voltage of 8.2 V DC, supports switching frequencies up to 5 kHz, and ...

The ELX1052 terminal features two NAMUR inputs, operates with a 24 V DC supply voltage, and weighs approximately 55 g. Part of the EL EtherCAT Term...

The EL9930 EtherCAT terminal from Beckhoff is part of the EL EtherCAT Terminals series. It runs on 24 V DC (–15%/+20%) with 120 mA E-bus current co...

The EL9576 brake chopper terminal is manufactured by Beckhoff. Part of the EL EtherCAT Terminals series, supports nominal voltages up to 72 V and m...

The EL9570 from Beckhoff features a 48 V DC nominal voltage and a 500 µF capacitance. Part of the EL EtherCAT Terminals, it supports 10 A ripple cu...

The EL9560 from Beckhoff accepts a 24 V DC input voltage and supplies an output current of ≤ 0.1 A. Part of the EL EtherCAT Terminals, it weighs ap...

The EL9550 module from Beckhoff's EL EtherCAT Terminals series operates at 24 V (-15%/+20%) with integrated overvoltage protection. It features sur...

The Beckhoff EL9520 EtherCAT Terminal is part of the EL EtherCAT Terminals series and features IP20 protection. It supplies 24 V DC with a maximum ...

The EL9515 terminal from Beckhoff’s EL EtherCAT Terminals series delivers a short-circuit proof stabilized 15 V DC output for industrial automation...

The EL9512 from Beckhoff provides an output voltage of 12 V DC B1 1% and supports a current consumption of 90 mA on the e-bus. As part of the EL E...

The EL9510 from Beckhoff’s EL EtherCAT Terminals series provides stable power for industrial automation. It delivers a 10 V DC ~1% output at up to ...