Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of RAC 3.5-200-460-A00-W1-220

RAC 3.5-200-460-A00-W1-220

by Bosch Rexroth Indramat
Request a quote
The RAC 3.5-200-460-A00-W1-220 spindle drive controller, fabricated by Bosch Rexroth Indramat, is an integral part of the RAC 3 series. The controller offers a 200 Amp current rating and needs a 220 Volts AC input while consuming 200 VA power for the control circuit. A three-phase power input ranging from 380 to 460 Volts AC (50 to 60 Hz) with a 10% tolerance fuels the power section of this controller. Key performance specifications include a 92 Amps continuous controller current and outputs between 35 and 30 Amps at an 8 kHz power section frequency. The controller boasts a rated peak output of 55 kilowatts and a continuous output of 27 kilowatts relative to the motor shaft, with a maximum regenerative capacity of 55 kilowatts at an ideal temperature range of 5-45°C and altitudes not exceeding 1000 meters. However, no additional interface, bleeder, and encoder inputs are available. The controller includes a built-in fan for temperature regulation and requires at least 160 mm clearance for proper airflow. Operating conditions outside these specifications will cause output derating. Only trained personnel should handle its installation and maintenance.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Series: RAC 3
  • Product Model: RAC 3.5-200-460-A00-W1-220
  • Current Rating: 200 Amps
  • Control Circuit Requirement: 220 Volts AC Input & 200 VA Power Consumption
  • Power Section Requirement: Three-Phase 380 to 460 Volts AC input at 50-60 Hertz
  • Power Input Tolerance: 10%
  • Continuous Controller Current: 92 Amps
  • Continuous Controller Output: 35 Amps
  • Continuous Controller Output at 8kHz: 30 Amps
  • Rated Peak Controller Output: 55 kilowatts
  • Continuous Controller Output: 27 kilowatts
  • Peak Regeneration Capacity: 55 kilowatts
  • Applicable Ambient Temperature: 5 to 45 degrees Celsius
  • Applicable Altitude: 1000 meters or less
  • Built-In Cooling System: Fan
  • Minimum Clearance for Airflow: 160 millimeters above and below
  • Output Derating Conditions: Above 45 degrees Celsius or above 1000 meters altitude
  • Recommended Installation & Maintenance Personnel: Trained personnel only

Get In Contact

Email: sales@servosupplier.com

Phone Number: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Servo Supplier is not an authorized distributor. We sell new surplus and refurbished products, all warranties are with Servo Supplier and not the manufacturer.