Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P00306-NBPH-0000

AKD-P00306-NBPH-0000

by Kollmorgen
$7,893.60 - $7,893.60
$7,893.60
$7,893.60 - $7,893.60
$7,893.60
Available, Shipping Varies
The AKD-P00306-NBPH-0000 is an AKD servo drive made by Kollmorgen, designed to operate within a control cabinet that provides adequate ventilation. With a rated input power of 1.2 kVA for S1 operation, the unit features one push button and two rotary switches for operation while maintaining an update rate of 1.5 MHz. The installation requires basic tools and the drive must be placed on a grounded, conductive mounting plate near the power supply. It features a protective shield for its X2 motor connector and an L-shaped grounding plate that adheres to EU standards. Connection to the drive must be exclusively done using the manufacturer's cables. The unit has no SD card slot, and its supply is connected via a DC bus brake resistor at the seven-pin X3 connector. It must be ensured that the electric voltage, reaching up to 900V, and all other operations of the unit are carefully handled for safety.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Model: AKD-P00306-NBPH-0000
  • Installation Requirement: Control cabinet with sufficient clearance for ventilation
  • Rated Input Power: 1.2 kVA for S1 operation
  • User Interface: One push-button and two rotary switches
  • Update Rate: 1.5 MHz
  • Condensation Prevention: Ensure no condensation at any time
  • Grounding: L shaped grounding plate conforming to EU standards
  • X2 Motor Connector: Shielding feature
  • EMC Filtering: To be incorporated by the user if needed
  • Connection Type: Only with the manufacturer’s cables
  • Safety Measures: Grounding, equipotential bonding and radiation-reducing shields must not be removed
  • Installation Precaution: Electrical installation to be done after switching off mains supply and securing against restart
  • SD Card Slot: No
  • X3 Connector: Connected to DC bus brake resistor for power supply; contains seven pins
  • Motor and Regen Resistor Connections: Shielded cables
  • Operational Voltage: Up to 900 V
  • Safe Handling: Never touch during operation; Measure DC bus link voltage after disconnecting power supply; Handle components only when voltage is less than 50 V.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204