Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P04807-NBCC-E000

AKD-P04807-NBCC-E000

by Kollmorgen
$7,229.74 - $7,229.74
$7,229.74
$7,229.74 - $7,229.74
$7,229.74
In Stock, Ships 3 - 5 Days
Kollmorgen's Ethernet-based digital servo drive, the AKD-P04807-NBCC-E000, features position indexing capabilities and is encased in a standard width housing. It's crucial to install the unit in a non-magnetic environment clear from corrosive or conductive materials and avoid horizontal mounting. Care should be taken not to allow condensate from cooling systems on surfaces of the drive. The device's mounting plate should be grounded as per EMC compliant regulations and it should maintain a clearance of 150 mm both above and below in the control cabinet. Despite being switched off, it may maintain live power and control connections briefly and supports EtherCAT and CANopen connectivity. Following IEC 61800-5-1 specifications, a double protection earth connection is needed. The drive's operational status should be monitored by its PLC. The drive requires standard cables and a node address setting when using a CANopen fieldbus interface. Routing power and control cables separately minimizes operational interference, while a differential analog input and large area grounding shielding are necessary. Improper grounding of the unit may pose electric shock risks.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Model: AKD-P04807-NBCC-E000
  • Servo Drive Type: Ethernet-based digital with position indexing capabilities
  • Housing: Standard width
  • Installation Site Requirements: Free of corrosive or conductive materials and no condensation water dripping
  • Mounting Orientation: Not horizontal
  • Mounting Plate: Must be grounded for EMC compliant grounding and shielding
  • Clearance Distance: More than 150 mm above and below
  • Power Retention: Keeps live power and control connections briefly after switching off
  • Connectivity Options: EtherCAT and CANopen
  • Protective Earth Connection: Doubled as per IEC 61800-5-1 specifications
  • Operating Status Monitoring: By its PLC for acknowledging critical situations
  • Cable Replacement: Only with standard cables that meet the specifications listed in the manual
  • Node Address Setting: Necessary if its CANopen fieldbus interface is used
  • Repair and Service: Without removing its grounding or equipotential bonding
  • Cable Routing: Power and control cables have to be routed separately
  • Analog Input: Must incorporate a differential input
  • Grounding for Shielding: With large areas
  • Electrical Shock Risk: Present with improper grounding.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204