Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P04807-NBEC-0000

AKD-P04807-NBEC-0000

by Kollmorgen
Request a quote
The AKD-P04807-NBEC-0000 is a position indexer servo drive produced by Kollmorgen. Adhering to US standards and supporting EtherCAT connectivity, this unit comes without an extension option and is paired with a standard width housing. It requires installation within a control cabinet and specific grounding methods, excluding use of bolts or hinges. Only shielded cables should be used when connecting filters and external regen resistors, following IEC 60204 feedback cable regulations. The drive is powered by an external 24 VDC supply and must operate with a mains choke if the mains voltage symmetry exceeds 3%. Parallel connections to the DC bus link with other similar drives must not exceed a combined total rating of 96 A. The drive should be disconnected from power during maintenance, supports a specific capacitor module from Kollmorgen and controls a 24 V holding brake found in the corresponding motor. Feedback functions are parameter-controlled via WorkBench, and this unit operates as a slave drive on an EtherCAT network. However, it doesn't support plug-and-play resolver connections for feedback.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Model: AKD-P04807-NBEC-0000
  • Customization: USA Standard
  • Connectivity: EtherCAT
  • Extension Option: None
  • Housing Width: Standard
  • Mounting: Control Cabinet with good connections
  • Grounding: Separate from mounting bolts or hinges
  • Feedback Cables: Manufacturers specified material, compliant with IEC 60204
  • Connection: Potential for filters and external regen resistors via shielded cables
  • 24 VDC Supply Connection: X1 connector through isolating transformer
  • Mains Choke Use: When mains voltage symmetry is more than 3%
  • Parallel Drive Connection: Total rating not to exceed 96 A
  • Power Supply Connection: Product should not be worked on when connected
  • Capacitor Module Connection: Cable of maximum 500 mm length and maximum 6 sq-mm cross-section
  • Power Output: Forms oscillating circuit with motor winding and motor supply cable
  • Holding Brake Control: 24 V
  • Auxiliary and Brake Voltage Supply: Separate
  • Feedback Parameters: Assigned through WorkBench
  • EtherCAT Network Connection: Works as a slave drive
  • Plug-and-Play Support: None for resolver connection for feedback.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204