Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-T01207-NBAN-0000

AKD-T01207-NBAN-0000

by Kollmorgen
Request a quote
The AKD-T01207-NBAN-0000 is a high-quality Ethernet-based servo drive developed by Kollmorgen. Famously called the AKD BASIC drive, this single-axis configured device does not entertain extension options. It offers an onboard encoder emulation and comes with a Safe Torque Off function, certified under the IEC 60261 specifications (SIL 2). The device supports bypassing the STO function via a direct connection to the +24 V supply. It's equipped with an internal regen resistor rated at 33 Ohms and it can also accommodate an external one of the same resistance. Operating within a position loop bandwidth of 1Hz to 250Hz, the product flaunts 11 digital inputs, two analog ones, and a DC bus capacitance of 470 µF. However, it's incompatible with single-phase supply networks. The servo drive complies with USA standards and is both cULus Listed and CE Certified. Note, it needs to be grounded properly to prevent damage and potential electric shock hazards. Its voltage parameters range from 340 V to 680 V DC bus link voltage, with a voltage rise speed of 7.2 kV/µs. Its X1 connector requires a tightening torque of 0.2 to 0.25 lbs.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Model: AKD-T01207-NBAN-0000
  • Product Type: Ethernet-based servo drive
  • Extension Option: Not Available
  • Product Category: AKD BASIC drive
  • Safety Function: SIL 2 certified Safe Torque Off function
  • Internal Regen Resistor: 33 Ohms
  • External Regen Resistor: Can Fit 33 Ohms
  • Position Loop Bandwidth: 1 Hz to 250 Hz frequency
  • Configuration: Single-axis
  • Digital Inputs: 11
  • Analog inputs: 2
  • DC Bus Capacitance: 470 µF
  • Operating Power Supply: Cannot be operated with single-phase
  • Standard Compliance: USA
  • Certification: cULus Listed and CE Certified
  • DC Bus Link Voltage: 340 V to 680 V
  • Voltage Rise Speed: 7.2 kV/µs
  • Tightening Torque (X1 Connector): 0.2 lbs to 0.25 lbs
  • Connectivity: Motor attachment using feedback connector
  • Safety Note: The device may have uncovered live parts when in use
  • Additional Safety Note: The unit can cause electric shock if touched during operation due to high voltage
  • Installation Requirement: Safe earthing connection to the protective earth busbar.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204