Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com

S70102-NAPMNA

by Kollmorgen
$8,748.31 - $8,748.31
$8,748.31
$8,748.31 - $8,748.31
$8,748.31
In Stock, Ships 1 - 2 Days
The S70102-NAPMNA is a digital servo amplifier created by Kollmorgen. It functions with an isolating transformer for essential indirect contact protection, and shuts down automatically when overheated. Included is an integral cooling fan and it must be positioned near the power supply. Its leakage current through the PE conductor comes from combined cable and equipment currents. The unit should be grounded for EMC compliant shielding, and can only be fitted upright using a 4mm Allen key and three M5 hex socket screws. The device's operation and assembly can be managed via a PC serial interface using Kollmorgen's DRIVEGUI.EXE software. Two directionally programmable digital inputs/outputs come standard. The amplifier's peak output rate is 4.5 Arms for up to two seconds with a tolerance of +/-3%. Operational limitations include a required ambient condition, functioning off a common DC bus link and 24 V supply voltage.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: S70102-NAPMNA
  • Operation: Through an isolating transformer
  • Mounting: Not possible on non-conductive or painted mounting plates
  • Overheat Protection: Automatic switch off
  • Cooling: Integrated fan
  • Assembly: Close to power supply
  • Leakage Current: Present due to combination of cable and equipment leakage currents
  • Protection: Requires 30 mA RCD for direct contact with motor cables shorter than 5 m
  • Mounting Plate: Must be grounded for EMC compliant shielding
  • Assembly Requirements: 4 mm Allen key and three M5 hexagon socket screws adhering to ISO 4762 specifications
  • Installation: Only in upright position
  • Fan Wiring: No wiring required
  • Surface Temperature: Very hot during and immediately after operation
  • Voltage: Prone to damage from wrong mains voltage
  • Setting: Through serial interface of a PC using manufacturer's DRIVEGUI.EXE software
  • Programmable Digital Inputs/Outputs: Two direction selectable
  • Expansion Card: PosI/O expansion card in slot 2
  • Peak Output: 4.5 Arms for approximately two seconds with a tolerance of +/-3%
  • Control Inputs and Outputs: Type 1 as per IEC 61131-2 specifications
  • Operating Conditions: Not meant to be operated outside the ambient
  • DC Bus Link: Can be operated off a common DC bus link without a built-in brake circuit
  • Supply Voltage: Constant 24 V
  • Holding Brake Function: Output stage switches off when enabled

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204