Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of VT-VSPA1-2-1X-V0-0

VT-VSPA1-2-1X-V0-0

by Bosch Rexroth Indramat
$0
$2,362.50 - $2,362.50
$2,362.50
$2,362.50 - $2,362.50
$2,362.50
Available, Shipping Varies
 More payment options
The Bosch Rexroth Indramat VT-VSPA1-2-1X-V0-0 is a valve amplifier designed for use with direct operated proportional pressure valves, specifically the DBET-6X and DBEM...-7X series. As an analog amplifier of Euro-card format, it boasts a front panel measuring 128 x 20mm. The amplifier comes pre-set with active characteristic curve, command-value dependent frequency, and 5-second ramp time. It also has a default pilot current of 100mA, and a maximum output current of 1.6A. For safe assembly, ensure the amplifier is de-energized and avoid connectors with freewheeling diodes or LED displays. Shielding for the command value lines should be earthed on the card side, or connected to 0 volts if no system earth is present. Operating at 24V DC, it has an input tolerance of +40% or -20%, and a max power consumption of 24 VA. Its weight for shipment is approximately 0.15kg.
30 Day Warranty
Technical Specifications
  • Manufacturer: Bosch Rexroth Indramat
  • Product Type: Valve Amplifier
  • Model Number: VT-VSPA1-2-1X-V0-0
  • Compatibility: DBET-6X, DBEM...-7X valves
  • Amplifier Format: Analog Euro-card
  • Amplifier Dimensions: 128 x 20 millimeters
  • Characteristics Curve & Command-Value Dependent Frequency: Default value active
  • Ramp Time: Default 5 seconds
  • Pilot Current: Default 100 milliamps
  • Max Output Current: Default 1.6 Amps
  • Installation Precaution: Assembly only when de-energized
  • Connection Specifications: Connectors with freewheeling diodes or LED displays must not be used
  • Shielding Requirement: Command value lines must be shielded
  • Recommended Shielding Connection: Earth on the card-side or 0 Volts operating voltage if no system earth
  • Distances: Minimum 1 meter from radar or aerial lines
  • Operating Voltage: 24 Volts DC
  • Input Tolerance: +40% (35 Volts DC) and -20% (18 Volts DC)
  • Power Consumption: Max 24 VA
  • Current Draw: Max 2 Amps
  • Analog Inputs: 0 to +10 Volts for command value 1 to 4, 0 to +10 Volts for differential input, 4 to 20 milliamps for current input, 0 to +5 Volts for ramp time external
  • Shipping Weight: Approximately 0.15 kilograms

Get In Contact

Email: sales@servosupplier.com

Phone Number: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Servo Supplier is not an authorized distributor. We sell new surplus and refurbished products, all warranties are with Servo Supplier and not the manufacturer.