Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of VT-HNC100-2-20/W-16-I-0

VT-HNC100-2-20/W-16-I-0

by Bosch Rexroth Indramat
$4,141.56 - $4,141.56
$4,141.56
$4,141.56 - $4,141.56
$4,141.56
Available, Shipping Varies
The VT-HNC100-2-20/W-16-I-0 from Bosch Rexroth Indramat is part of the VT-HNC Digital Axis Controllers series. It uses a 16/32-bit MC68376 processor with 1 Mb Flash, 8 KB EEPROM and 256 KB RAM, and delivers a max. 40 mV calibration tolerance. Inputs include ±10 V at 200 KΩ ±2 % and 4–20 mA at 100 Ω ±0.2 % with 5 mV resolution and <10 mV non-linearity. The unit measures 106.5×155×204 mm and has a residual ripple of ±60 mV.
30 Day Warranty
Technical Specifications
  • Calibration tolerance: max. 40 mV
  • Current Input resistance: 100 ohm +/- 0.2%
  • Dimension: 106.5 * 155 * 204mm
  • Input current: 4 to 20 mA
  • Input resistance: 200 Kilo Ohms +/- 2%
  • Input voltage: +10 to -10V
  • Memory: Flash Eprom1 Mb; EEPROM 8kb;RAM 256KB
  • Output current: 4 to 20 mA
  • Output voltage: -10 to +10 V
  • Power loss: 0.1 to 0.4 %
  • Processor : 16/32 bit MC68376
  • Residual ripple content: +/-60 mV
  • Voltage inputs Non linearity: < 10mV
  • Voltage inputs Resolution: 5 mV

Get In Contact

Email: sales@servosupplier.com

Phone Number: 1-888-551-3082

International: 1-919-443-0207

Fax: 1-919-867-6204

Servo Supplier is not an authorized distributor. We sell new surplus and refurbished products, all warranties are with Servo Supplier and not the manufacturer.