8LCN58.EB030D030-0
The 8LCN58.EB030D030-0 is manufactured by B&R Automation for the 8LS Synchronous Motors series. This motor is intended for axis drives in industrial automation where compact flange mounting and repeatable positioning are required. Its 8LSN designation places it in the higher-inertia group of the series, which suits applications that need stable motion and controlled acceleration. A smooth shaft supports backlash-free coupling to gearboxes or couplers, while the swivel connector arrangement helps simplify cable routing in crowded enclosures. The built-in feedback system supplies absolute position data directly to compatible servo drives for closed-loop motion control.
At the mechanical interface, the motor uses a flange that measures 142 mm, which fits common mounting patterns and provides the stiffness needed for gearhead integration. The shaft reaches a rated speed of 3000 rpm under continuous load, giving the system a standard operating point for gearing and motion tuning. Position feedback is provided by an Inductive EnDat sensor that resists magnetic stray fields. The feedback device delivers 19/12-bit resolution, so the drive receives high single-turn precision together with multi-turn tracking. Thermal dissipation is handled by a self-cooling housing, avoiding the need for separate forced-air equipment.
For cabling, the power and signal plugs use an angled swivel connection, allowing the harness to rotate and reducing strain in tight cabinets. Communication with the controller follows EnDat 2.1, which supports synchronous serial updates and electronic data transfer between the motor and drive. The feedback system retains absolute position across power cycles through a multi-turn 4096 revs counter, so the axis can return to operation without a homing move. The motor is supplied without a holding brake, so standstill retention must be provided externally. It also comes without an oil seal, and the length code 8 layout is intended for clean, dry environments.
