8LSA36.D1022D000-0
The 8LSA36.D1022D000-0 is a servo motor from the 8LS Synchronous Motors series produced by B&R Automation. This three-phase synchronous unit is intended for positioning and speed control tasks in industrial automation where compact rotary axes are required. It converts controlled electrical input into rotary motion for indexing, feed, and synchronized axis movements in packaging, printing, and assembly equipment. Within the series, it carries the 8LSA designation and uses a standard bearing arrangement, so it is suited to machines that do not require reinforced bearings. A front mounting flange helps align the motor with connected gearboxes or belt drives.
The motor uses a mounting flange that measures 91.3 mm, and its power and feedback cables leave through an angled swivel connection with a single plug-in connector. This cable exit arrangement helps routing in tight machine spaces where straight rear clearance may be limited. Its rated speed is 2200 rpm during continuous operation. Feedback is provided by an Optical EnDat encoder that communicates through the EnDat 2.2 protocol. The encoder has 25/12-bit resolution for single-turn and multi-turn position data, supporting precise control without an external transducer.
The encoder stores position with a multi-turn capability of 4096 revolutions, and the motor uses a length code 6 housing that balances inertia and torque output within this frame. The output end uses a smooth shaft, which suits couplings that do not require a keyway. The motor comes without a holding brake or oil seal, which helps reduce axial length and limits additional wear points. Heat is removed by self-cooling through free air circulation, so no external blower or liquid lines are required. Because cooling relies on ambient airflow around the housing, the installation should leave enough open space for heat to dissipate naturally.
