Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P00306-NAEC-0051

AKD-P00306-NAEC-0051

by Kollmorgen
$2,299.00 - $2,299.00
$2,299.00
$2,299.00 - $2,299.00
$2,299.00
Available, Shipping Varies
The Kollmorgen AKD-P00306-NAEC-0051 is an industrial-grade Ethernet servo drive, positioned within the AKD range of digital servo drives. Built specifically for industrial use, this device does not incorporate a cooling fan and shows a continuous current derating when operating between 40 °C and 55 °C. It features 10 ms timing for the opening and closing of relay outputs and a protective earth block capable of a tightening torque up to 1.7 Nm. The AKD-P00306-NAEC-0051 has no internal regenerative resistor but allows the attachment of an external resistor as per the user's requirements. It is designed for seamless coupling with other drives using a DC bus link connection and complies with the IEC 60529 specifications when fitted with fingersafe fuse holders. During the activation of the holding brake function, the device displays specific output stage switching timings. Note that there could be residual voltages in its capacitors briefly after disconnection of the power supply.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: AKD-P00306-NAEC-0051
  • Product Type: Ethernet Servo Drive
  • Application: Industrial Applications
  • Ventilation: No Inbuilt Fan
  • Operation Temperature: 40 °C to 55 °C (with continuous current derating)
  • Relay Output Interval Time: Open and Closed intervals of 10 ms
  • Protective Earth Block: Supports a tightening torque of up to 1.7 Nm
  • Fuse Holder Specification: Fingersafe fuse holders as per IEC 60529 specifications
  • Braking Mode: Inbuilt Dynamic, shorting motor terminals in phase with back EMF
  • Regen Resistor: Allows connection of external resistor based on application needs
  • Connection Type: DC bus link connection
  • Mounting Plate Requirement: Must not be painted or non-conductive
  • Housing Width: Standard
  • Assembly Location: Next to power supply inside control cabinet
  • Condensation Management: Ensure no condensation on drive when cooling system is installed
  • Voltage Hazard: Capacitors may retain dangerous voltages after power disconnection

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204