Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P00607-NAAN-0000

AKD-P00607-NAAN-0000

by Kollmorgen
$5,398.00 - $5,398.00
$5,398.00
$5,398.00 - $5,398.00
$5,398.00
Available, Shipping Varies
The AKD-P00607-NAAN-0000 servo drive, crafted by Kollmorgen, needs to be correctly grounded using an included mounting plate prior to use. It's crucial to operate the device within a temperature envelope of 0 °C - 40 °C and in a well-ventilated area. To fixate the drive, a 3mm T-handle Allen key and M4 hexagon socket screws are required. Any analog outputs come with a maximum output impedance of 110 Ohms. Once decommissioned, exterior cleaning may be performed; interior cleaning is manufacturer-restricted. This servo drive has a 1.5 kW continuous regen power for its external resistor and possesses EMC filters for noise immunity. It adhers to Category C2 standards if the motor cable is less than 10 meters in length. Compliance is also noted with EC 2006/42/EC machinery[ and EC 2014/35/EC low voltage directives. Operators should note the 5% - 85% relative humidity range tolerable during use, with no condensation present during operation, transportation, or storage.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Model: AKD-P00607-NAAN-0000
  • Installation Requirement: Must be properly grounded before operation
  • Operating Temperature Range: 0 °C to 40 °C
  • Mounting Accessories: Mounting plate, 3 mm T-handle Allen key, M4 hexagon socket screws
  • Output Impedance: Maximum 110 Ohms for analog outputs
  • Cleaning Requirement: Clean casing only after decommissioning, interiors cleaned only by manufacturer
  • Regen Power: Continuous 1.5 kW for external resistor
  • Additional Features: EMC filters for noise immunity, C2 category for motor cable if less than 10 meters
  • Compliance: EC 2006/42/EC Machinery directives, EC 2014/35/EC Low voltage directives
  • Relative Humidity: 5% to 85%, no condensation
  • Installation Expertise: Must be installed by skilled personnel
  • Mounting Requirements: Should be mounted in a closed control cabinet with ample ventilation spacing.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204