Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P00607-NBS3-0000

AKD-P00607-NBS3-0000

by Kollmorgen
Request a quote
The AKD-P00607-NBS3-0000 servo drive by Kollmorgen is an indexer specially modified for US standards. These units, sporting a standard housing and no option cards, utilize an IP address that is user-configurable through software or hardware methods. SERCOS III bus interface supports a range of ring and line topologies, available at its X5 and X6 connectors, with diagnostic LEDs built into the connectors. The device includes digital inputs compatible with either switched +24 V or switched GND, alongside short circuit protection. Jogging function is established through a set point input, while analogue and digital type I/O signals can be connected via its two I/O connectors. Its fault relay output connection at X8 offers a 10ms timeframe for open/close process. Hardware Enable input's STO must have a 24V signal for the Enable function to be available. The device possesses digital inputs 3 to 7 with a low state rating of less than 15 mA current and -2V to +2V voltage. Finally, it uses its first two digital inputs for quick position latching.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product type: Ethernet based position indexer
  • Country Standard: USA
  • Option cards: No
  • Housing type: Standard
  • IP address set up: Hardware or software option
  • Bus interface: SERCOS III
  • Interface availability: X5 and X6 connectors
  • Digital inputs: Adaptable to switched +24 V or switched GND
  • Input protection: Short circuit protected
  • Set point input: Used to set up a jog function
  • I/O connectors: Two, supports analog and digital type I/O signals
  • Fault relay output: Available at the X8 connector
  • Fault relay contact timeframe: 10 ms
  • Pre-programmed function messages: Output via the first two digital inputs
  • Enable input: Serial Hardware, wiring mandatory
  • Enable function reference line: DCOM8
  • Enable function condition: Available only when the STO input has a 24 V signal
  • Current rating: Less than 15 mA (for digital inputs 3 to 7 in low state)
  • Voltage rating: -2 V to +2 V (for digital inputs 3 to 7 in low state)
  • Position latching: Utilizes the first two digital inputs due to their fast nature

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204