Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P01206-NBEI-0000

AKD-P01206-NBEI-0000

by Kollmorgen
$6,250.56 - $6,250.56
$6,250.56
$6,250.56 - $6,250.56
$6,250.56
In Stock, Ships 3 - 5 Days
The Kollmorgen AKD-P01206-NBEI-0000 is an Ethernet servo drive that requires a PC connection for optimal communication. Proper functioning in velocity mode is indicated by an 'o1' code on the display. The device uses two rotary switches for IP address setting, with the '00' setting specifically used for DHCP/AutoIP address. With a connection capacity of one user at a time, it includes a setup wizard for initial configuration. Incorrect wiring can cause damage, so installation should happen without an active power connection. Safety measures include a leakage current above 3.5mA to the protective earth link, IEC 60204 standard cables, potential for connection to a PLC, and mandatory association with specific fuses. It operates with a motor cable of up to 50m in length with a cross-section of 1.5mm2, and a DC bus capacitance of 940µF. With a unique IP address for network identification, this drive lacks SD card support and is equipped with a direct DC input.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: AKD-P01206-NBEI-0000
  • Communication Interface: Ethernet
  • Operating Mode: Velocity Mode
  • Display: o1 Code
  • IP Address Set Up: 2 Rotary Switches
  • Connection Type: Single User
  • First Time Configuration: AKD Setup Wizard
  • Leakage Current: 3.5 mA
  • System Integration: PLC Required
  • Cable Requirements: IEC 60204 Sprecifications
  • Switching Frequency: 10 kHz
  • Fuse Requirements: UL and CSA Listed 600 VAC, 200 kA Class J time delay cartridge fuses
  • Motor Cable Length: Maximum 50 m with 1.5 mm2 cross-section when a choke is used
  • DC Bus Capacitance: 940µF
  • Motor Feedback Connector: X10
  • Unique Identifier: IP Address
  • SD Card Support: No
  • Power Input: Direct DC

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204