Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P01207-NBS3-0000

AKD-P01207-NBS3-0000

by Kollmorgen
Request a quote
The AKD-P01207-NBS3-0000, produced by Kollmorgen, functions as an Ethernet servo drive that simulates a position indexer. Key features include the ability to modify process variables and introduce time delays. A green illumination on the RJ-45 connector and Ethernet interface denotes its functioning electrical connection. Configuration is automated via the Setup Wizard post-setup which is compatible with certain Windows operating systems. Identification of fault codes is optimized through a prefix 'F' with three digit codes. Functionality differs with the rotary switches depending on the IP mode. The connection with the SERCOS III network allows line and ring topologies, needing proper grounding prior use and safe placement on conductive surfaces. The product's leakage current is slightly higher than 3.5 mA and requires a waiting time of seven minutes for connection removal post-power discharge. The device's hardware must remain unmodified for optimal performance.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: AKD-P01207-NBS3-0000
  • Product Type: Ethernet servo drive
  • Functionality: Position indexer
  • Housing: Standard
  • Electrical Connection Indicator: Green LED on RJ-45 connector
  • Software Compatibility: Selected Windows operating systems
  • Drive Enablement: Automatic after configuration by Setup Wizard
  • Fault Code Display: Three digits with 'F' prefix
  • HW Enable Signal Location: Pin 4 of X8 connector
  • Rotary Switches Location: Front panel
  • Topology Support: Line and ring topologies on associated SERCOS III network
  • SERCOS Network Connection Points: X5 and X6 RJ-45 connectors
  • Start-up Requirement: Proper grounding connection
  • Placement Requirement: Conductive surface
  • Leakage Current: Higher than 3.5 mA
  • Waiting Time After Power Disconnection: At least seven minutes
  • Hardware Modification: Not allowed

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204