Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKD-P02407-NBEI-0000

AKD-P02407-NBEI-0000

by Kollmorgen
$11,322.09 - $11,322.09
$11,322.09
$11,322.09 - $11,322.09
$11,322.09
In Stock, Ships 3 - 5 Days
The AKD-P02407-NBEI-0000 is a three-phase servo drive made by Kollmorgen, boasting rapid operation due to its Ethernet capabilities. This drive, part of the AKD product line, is designed to comply with USA standards and features a B6 bridge. It requires a residual current protective device to deflect any DC fault currents. It may also be used with an isolating transformer for added protection against indirect contact, even if the leakage current is high. Providing it's adequately grounded, the device is resistant to high EMC voltage levels, thereby minimizing electrification risks. It's packaged in a standard width housing and doesn't have expansion capabilities. Proper installation requires specific tools and the site should be devoid of conductive or corrosive materials. It has to be installed and wired when it's not live and connected with the largest surface area of the control cabinet. It only supports cables complying with IEC 60204 specifications.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: AKD-P02407-NBEI-0000
  • Product Group: AKD Servo Drives
  • Operation Support: Ethernet
  • System Type: Three-phase
  • Bridge Type: B6
  • Installation Requirement: Residual current protective device
  • High Voltage Handling: Via isolating transformer
  • Housing: Standard width, Non-extensible
  • Installation Tools Required: M4 hexagon socket-cap screws, 3mm T-handle Allen key, #2 Phillips head screwdriver, Small slotted screwdriver
  • Installation Environment: Free of conductive or corrosive materials
  • Grounding: EMC compliant shielding and grounding required
  • Protective Earth Wiring: Green colored wires with one or more yellow stripes
  • DC Bus Link Voltage Handling: Must be less than 50 V before handling after operation
  • Fusing Tolerance: Low, prone to damage from high fusing
  • Cable Compliance: IEC 60204 specifications
  • Installation Safety: Ensure unit is not live before installation and wiring
  • Connection Requirement: Electronically conductive connection between drive and mounting plate required

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204