Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKM33H-ACCNR-01

AKM33H-ACCNR-01

by Kollmorgen
$3,375.00 - $3,375.00
$3,375.00
$3,375.00 - $3,375.00
$3,375.00
Available, Shipping Varies
The Kollmorgen AKM33H-ACCNR-01 is a synchronous servomotor partnered with a SERVOSTAR digital servo amplifier. It features a 70mm flange adhering to IEC standards, a cylindrically ended keyway shaft and a rated power of 1.31 kW at 230 V. The shaft seal helps protect against oil mist and spray but may cause data to be lower than expected. The motor handles both axial and radial forces while operating and utilizes a locking thread for power transmission. Only technicians knowledgeable in national accident prevention regulations should handle the motor which requires regular checks for safe operation including surface temperature checks and monitoring the thermal resistor in its windings. To avoid damage, the shaft should be as free from axial forces as possible and a low-resistance earthing connection is necessary for personnel safety. Compliance with connection condition specifications and according to the wiring diagram in the servo amplifier manual is essential.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Type: Synchronous Servomotor
  • Model: AKM33H-ACCNR-01
  • Drive Type: SERVOSTAR digital servo amplifier
  • Flange Dimensions: 70 mm (IEC standard)
  • Shaft Type: Cylindrical with keyway
  • Shaft Seal: Present
  • Power Transmission: Locking thread through cylindrical shaft end
  • Potential Lower Performance: Due to shaft seal
  • Incorporation in Electrical Machinery: Only after risk assessment
  • IP Protection: IP 67 for shaft bushing
  • Potential Risks: Damage to property or personnel due to improper handling
  • Connection Compliance: Must comply with connection condition specifications
  • Handling Precautions: Handled by individuals aware of national accident prevention regulations
  • Surface Temperature Check: Below 40 °C after operation
  • Personnel Protection: Requires low-resistance earthing connection
  • Thermal Resistor: Present in windings
  • Rated Power: 1.31 kW at 230 V
  • Axial Forces: To be avoided on shaft to prevent motor damage
  • Wiring: According to the servo amplifier manual.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204