Skip to content
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
Call:1-888-551-3082 International: 1-919-443-0207 sales@servosupplier.com
series image of AKM53K-ANCNR-00

AKM53K-ANCNR-00

by Kollmorgen
$3,856.50 - $3,856.50
$3,856.50
$3,856.50 - $3,856.50
$3,856.50
Available, Shipping Varies
The AKM53K-ANCNR-00 is a high-performance servomotor crafted by Kollmorgen. Its design, devoid of a holding brake, assures superior delivery in industrial applications. This device, featuring a smooth shaft, can be raised both horizontally and vertically but mustn't be directly connected to the main power source. With protective measures against condensation during assembly, operation, storage, and transportation, it has no derating unless used above 1000m sea level, which necessitates a 10K temperature drop per 1000m. The motor is incorporated with ball bearings needing replacement after 20,000 operational hours. Equipped with a resolver feedback system and a standard construction, the servomotor offers Class F insulation and a standstill torque of 11.6 Nm and current of 9.4 A, each with a +/-10% tolerance. The motor has 10 poles and requires enough heat transfer during setup. Operation and wiring should only be undertaken by trained individuals, and it should be used with a compatible servo amplifier. Damage can occur to the shaft and bearings upon impact.
30 Day Warranty
Technical Specifications
  • Manufacturer: Kollmorgen
  • Product Code: AKM53K-ANCNR-00
  • Type: Servomotor
  • Shaft Type: Smooth
  • Holding Brake: Not equipped
  • Lifting Direction: Horizontal and vertical
  • Connection to Main Supply: Not direct
  • Condensation Protection: Required during assembly, operation, storage, and transportation
  • Altitude Derating: None above 1000 m above mean sea level
  • Temperature Reduction: 10 K per 1000 m above sea level
  • Bearing Type: Ball bearings
  • Bearing Replacement Hours: 20000 operating hours
  • Coating: Matt black polyester powder
  • Coating Solvent Resistance: Not resistant
  • Feedback System: Resolver
  • Construction: Standard
  • Insulation: Class F
  • Standstill Torque: 11.6 Nm (+/-10% tolerance)
  • Standstill Current: 9.4 A (+/-10% tolerance)
  • Number of Poles: 10
  • Heat Transfer Requirement: Sufficient in flange and surroundings
  • Wiring Personnel Requirement: Qualified and trained in electrical engineering
  • Servo Amplifier Requirement: Must use suitable one from same manufacturer
  • Blow Impact Result: Damage to shaft and bearings
  • Shaft Mounting Constraint: Not allowed.

Get In Contact

Email: sales@servosupplier.com


Phone Number: 1-888-551-3082


International: 1-919-443-0207

Fax: 1-919-867-6204